Test results will be written into 'releases/testresults/2021.02.9-2022-02-09-a74aabda' Event bootloader 3.933/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 93.429/200: 00 B) 01 [ 16.322641] sd 2:0:0:0: [sda] Write Protect is off 02 [ 16.346595] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does 03 n't support DPO or FUA 04 [ 16.495776] sda: sda1 05 [ 16.583829] sd 2:0:0:0: [sda] Attached SCSI disk 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 18.735327] loop0: detected capacity change from 0 to 56813 10 [ 18.743376] loop0: detected capacity change from 56813 to 56812 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 8.276/40: 00 [ 16.322641] sd 2:0:0:0: [sda] Write Protect is off 01 [ 16.346595] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does 02 n't support DPO or FUA 03 [ 16.495776] sda: sda1 04 [ 16.583829] sd 2:0:0:0: [sda] Attached SCSI disk 05 Media found and mounted. 06 Unpacking save.tgz... 07 Setting up overlay... 08 [ 18.735327] loop0: detected capacity change from 0 to 56813 09 [ 18.743376] loop0: detected capacity change from 56813 to 56812 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 20.293/80.0: 00 Launching net_daemon.sh 01 Populating /dev using udev: done 02 Starting network: OK 03 Starting gpm (eventually, maybe) 04 05 Login as root or user (no password). 06 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 07 08 Welcome! (/dev/tty1) 09 10 i586con login: root 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sda busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 01-lowram-usb === total time | wait time | event 3.9s | 3.9s | bootloader 97.6s | 93.4s | login prompt 106.3s | 8.3s | logged in 127.3s | | Shutdown === HTML: 01-lowram-usb.html Event bootloader 3.401/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 59.390/200: 00 [ 12.479220] zram0: detected capacity change from 0 to 32768 01 Setting up swapspace version 1, size = 16773120 bytes 02 [ 12.670147] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 03 6380k SS 04 [ 13.303885] random: crng init done 05 Media found and mounted. 06 Unpacking save.tgz... 07 Copying read-only image to RAM... 08 Setting up overlay... 09 [ 18.696230] loop0: detected capacity change from 0 to 56553 10 [ 18.712269] loop0: detected capacity change from 56553 to 56552 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 10.861/40: 00 Setting up swapspace version 1, size = 16773120 bytes 01 [ 12.670147] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 02 6380k SS 03 [ 13.303885] random: crng init done 04 Media found and mounted. 05 Unpacking save.tgz... 06 Copying read-only image to RAM... 07 Setting up overlay... 08 [ 18.696230] loop0: detected capacity change from 0 to 56553 09 [ 18.712269] loop0: detected capacity change from 56553 to 56552 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: user 24 user@i586con ~ $ Event ssh key entered 1.039/10: 00 [ 18.696230] loop0: detected capacity change from 0 to 56553 01 [ 18.712269] loop0: detected capacity change from 56553 to 56552 02 Switching to main /sbin/init 03 Starting syslogd: OK 04 Starting klogd: OK 05 Launching net_daemon.sh 06 Populating /dev using udev: done 07 Starting network: OK 08 Starting gpm (eventually, maybe) 09 10 Login as root or user (no password). 11 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 12 13 Welcome! (/dev/tty1) 14 15 i586con login: user 16 user@i586con ~ $ mkdir -p .ssh 17 cho 'ssuser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZas 18 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 19 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 20 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 21 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 22 V8B urjaman@phenom' > .ssh/authorized_keys 23 cuser@i586con ~ $ cd .ssh 24 user@i586con ~/.ssh $ Event sshd started 6.584/400: 00 Switching to main /sbin/init 01 Starting syslogd: OK 02 Starting klogd: OK 03 Launching net_daemon.sh 04 Populating /dev using udev: done 05 Starting network: OK 06 Starting gpm (eventually, maybe) 07 08 Login as root or user (no password). 09 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 10 11 Welcome! (/dev/tty1) 12 13 i586con login: user 14 user@i586con ~ $ mkdir -p .ssh 15 cho 'ssuser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZas 16 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 17 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 18 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 19 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 20 V8B urjaman@phenom' > .ssh/authorized_keys 21 cuser@i586con ~ $ cd .ssh 22 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 23 374 24 user@i586con / $ Warning: Permanently added '[127.0.0.1]:1586' (ED25519) to the list of known hosts. Event ssh test complete 1.012/30.0: 00 Switching to main /sbin/init 01 Starting syslogd: OK 02 Starting klogd: OK 03 Launching net_daemon.sh 04 Populating /dev using udev: done 05 Starting network: OK 06 Starting gpm (eventually, maybe) 07 08 Login as root or user (no password). 09 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 10 11 Welcome! (/dev/tty1) 12 13 i586con login: user 14 user@i586con ~ $ mkdir -p .ssh 15 cho 'ssuser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZas 16 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 17 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 18 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 19 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 20 V8B urjaman@phenom' > .ssh/authorized_keys 21 cuser@i586con ~ $ cd .ssh 22 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 23 374 24 user@i586con / $ Shutdown 7.984/80.0: 00 i586con login: user 01 user@i586con ~ $ mkdir -p .ssh 02 cho 'ssuser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZas 03 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 04 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 05 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 06 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 07 V8B urjaman@phenom' > .ssh/authorized_keys 08 cuser@i586con ~ $ cd .ssh 09 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 10 374 11 user@i586con / $ su -c poweroff 12 user@i586con / $ Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: none busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 The system is going down NOW! 20 Sent SIGTERM to all processes 21 logout 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 02-network-ssh === total time | wait time | event 3.4s | 3.4s | bootloader 62.9s | 59.4s | login prompt 74.2s | 10.9s | logged in 109.6s | 1.0s | ssh key entered 120.2s | 6.6s | sshd started 126.2s | 1.0s | ssh test complete 135.3s | | Shutdown === HTML: 02-network-ssh.html Formatting 'cursed.qcow', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=1073741824 lazy_refcounts=off refcount_bits=16 Event bootloader 3.456/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 60.768/200: 00 [ 4.806760] Freeing initrd memory: 4096K 01 [ 5.159725] Freeing initrd memory: 3832K 02 [ 6.337524] Freeing unused kernel image (initmem) memory: 308K 03 [ 6.344509] Write protecting kernel text and read-only data: 2884k 04 [ 6.347556] Run /init as init process 05 [ 7.055679] loop0: detected capacity change from 0 to 56552 06 [ 9.489150] zram: Added device: zram0 07 [ 10.260963] zram0: detected capacity change from 0 to 32768 08 Setting up swapspace version 1, size = 16773120 bytes 09 [ 10.426088] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 10 6380k SS 11 Starting syslogd: [ 13.358566] random: crng init done 12 OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 6.813/20: 00 [ 5.159725] Freeing initrd memory: 3832K 01 [ 6.337524] Freeing unused kernel image (initmem) memory: 308K 02 [ 6.344509] Write protecting kernel text and read-only data: 2884k 03 [ 6.347556] Run /init as init process 04 [ 7.055679] loop0: detected capacity change from 0 to 56552 05 [ 9.489150] zram: Added device: zram0 06 [ 10.260963] zram0: detected capacity change from 0 to 32768 07 Setting up swapspace version 1, size = 16773120 bytes 08 [ 10.426088] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 09 6380k SS 10 Starting syslogd: [ 13.358566] random: crng init done 11 OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Event fdisk complete 3.358/30.0: 00 01 i586con login: root 02 i586con ~ # printf 'n\n\n\n\n\nw\n' | fdisk /dev/sda 03 04 Welcome to fdisk (util-linux 2.36.2). 05 Changes will remain in memory only, until you decide to write them. 06 Be careful before using the write command. 07 08 Device does not contain a recognized partition table. 09 Created a new DOS disklabel with disk identifier 0x46e5a87f. 10 11 Command (m for help): Partition type 12 p primary (0 primary, 0 extended, 4 free) 13 e extended (container for logical partitions) 14 Select (default p): 15 Using default response p. 16 Partition number (1-4, default 1): First sector (2048-2097151, default 2048): La 17 st sector, +/-sectors or +/-size{K,M,G,T,P} (2048-2097151, default 2097151): 18 Created a new partition 1 of type 'Linux' and of size 1023 MiB. 19 20 Command (m for help): The partition table has been altered. 21 Calling ioctl() to re-read partition table. 22 Syncing disks. 23 24 i586con ~ # Event install complete 142.300/240: 00 xt4 01 The filesystem needs a label. 02 Label [I586CON_BOOT]: Label chosen: I586CON_BOOT 03 The given disk partition will be ERASED, check that it is correct. 04 Type yes to continue: Continuing in 3 seconds 05 mke2fs 1.45.6 (20-Mar-2020) 06 Discarding device blocks: done 07 Creating filesystem with 261888 4k blocks and 65536 inodes 08 Filesystem UUID: bd47950e-a5de-4e81-a23c-a1b9a3f0d330 09 Superblock backups stored on blocks: 10 32768, 98304, 163840, 229376 11 12 Allocating group tables: done 13 Writing inode tables: done 14 Creating journal (4096 blocks): done 15 Writing superblocks and filesystem accounting information: done 16 17 Save complete - wrote rootfs.img and save.tgz 18 Installing for i386-pc platform. 19 grub-install: warning: cannot open directory `//share/locale': No such file or d 20 irectory. 21 Installation finished. No error reported. 22 Wrote grub.cfg 23 Installation complete, to new beginnings :) 24 Shutdown 10.078/80.0: 00 Creating journal (4096 blocks): done 01 Writing superblocks and filesystem accounting information: done 02 03 Save complete - wrote rootfs.img and save.tgz 04 Installing for i386-pc platform. 05 grub-install: warning: cannot open directory `//share/locale': No such file or d 06 irectory. 07 Installation finished. No error reported. 08 Wrote grub.cfg 09 Installation complete, to new beginnings :) 10 poweroff 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 umount: can't unmount /: Invalid argument 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 03-install-b2r-ext === total time | wait time | event 3.5s | 3.5s | bootloader 64.6s | 60.8s | login prompt 71.9s | 6.8s | logged in 78.4s | 3.4s | fdisk complete 224.8s | 142.3s | install complete 235.6s | | Shutdown === HTML: 03-install-b2r-ext.html Event GRUB 7.954/20: 00 01 GNU GRUB version 2.04 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 4s. 23 24 Event login prompt 60.438/200: 00 [ 13.278425] zram: Added device: zram0 01 [ 13.322403] zram0: detected capacity change from 0 to 32768 02 Setting up swapspace version 1, size = 16773120 bytes 03 [ 13.474698] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 04 6380k SS 05 [ 15.120104] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 06 (null). Quota mode: disabled. 07 Media found and mounted. 08 Unpacking save.tgz... 09 Setting up overlay... 10 [ 15.547073] loop0: detected capacity change from 0 to 56814 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 5.325/40: 00 [ 13.322403] zram0: detected capacity change from 0 to 32768 01 Setting up swapspace version 1, size = 16773120 bytes 02 [ 13.474698] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 03 6380k SS 04 [ 15.120104] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 05 (null). Quota mode: disabled. 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 15.547073] loop0: detected capacity change from 0 to 56814 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 8.541/80.0: 00 Launching net_daemon.sh 01 Populating /dev using udev: done 02 Starting network: OK 03 Starting gpm (eventually, maybe) 04 05 Login as root or user (no password). 06 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 07 08 Welcome! (/dev/tty1) 09 10 i586con login: root 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sda1 busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 04-hdboot-ext-cdl === total time | wait time | event 8.0s | 8.0s | GRUB 68.6s | 60.4s | login prompt 74.3s | 5.3s | logged in 83.6s | | Shutdown === HTML: 04-hdboot-ext-cdl.html Formatting 'cursed.qcow', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=419430400 lazy_refcounts=off refcount_bits=16 Event bootloader 3.388/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 55.895/200: 00 [ 12.497693] random: crng init done 01 [ 12.717537] zram: Added device: zram0 02 [ 12.748539] zram0: detected capacity change from 0 to 32768 03 Setting up swapspace version 1, size = 16773120 bytes 04 [ 12.897553] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 05 6380k SS 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 14.523219] loop0: detected capacity change from 0 to 56813 10 [ 14.525234] loop0: detected capacity change from 56813 to 56812 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 5.304/20: 00 [ 12.717537] zram: Added device: zram0 01 [ 12.748539] zram0: detected capacity change from 0 to 32768 02 Setting up swapspace version 1, size = 16773120 bytes 03 [ 12.897553] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 04 6380k SS 05 Media found and mounted. 06 Unpacking save.tgz... 07 Setting up overlay... 08 [ 14.523219] loop0: detected capacity change from 0 to 56813 09 [ 14.525234] loop0: detected capacity change from 56813 to 56812 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Event fdisk complete 3.345/30.0: 00 01 i586con login: root 02 i586con ~ # printf 'n\n\n\n\n\nw\n' | fdisk /dev/sda 03 04 Welcome to fdisk (util-linux 2.36.2). 05 Changes will remain in memory only, until you decide to write them. 06 Be careful before using the write command. 07 08 Device does not contain a recognized partition table. 09 Created a new DOS disklabel with disk identifier 0x0926c8b4. 10 11 Command (m for help): Partition type 12 p primary (0 primary, 0 extended, 4 free) 13 e extended (container for logical partitions) 14 Select (default p): 15 Using default response p. 16 Partition number (1-4, default 1): First sector (2048-819199, default 2048): Las 17 t sector, +/-sectors or +/-size{K,M,G,T,P} (2048-819199, default 819199): 18 Created a new partition 1 of type 'Linux' and of size 399 MiB. 19 20 Command (m for help): The partition table has been altered. 21 Calling ioctl() to re-read partition table. 22 Syncing disks. 23 24 i586con ~ # Event install complete 81.789/240: 00 Syncing disks. 01 02 i586con ~ # printf 'fat\n\nyes\n' | hdinstall /dev/sda1 /dev/sda 03 This is the device to be used: 04 Device /dev/sda1 is a 399.0 MiB partition 1 05 Disk Vendor/Type: ATA 06 Disk Model: QEMU HARDDISK 07 Disk Size: 0.391 GiB 08 Current filesystem (if any) cannot be used. 09 Choose the filesystem to format to (e[xt4]/[v]fat or quit): Filesystem chosen: v 10 fat 11 The filesystem needs a label. 12 Label [I586CONBT]: Label chosen: I586CONBT 13 The given disk partition will be ERASED, check that it is correct. 14 Type yes to continue: Continuing in 3 seconds 15 mkfs.fat 4.1 (2017-01-24) 16 455 blocks 17 Save complete - wrote rootfs.img and save.tgz 18 Installing for i386-pc platform. 19 grub-install: warning: cannot open directory `//share/locale': No such file or d 20 irectory. 21 Installation finished. No error reported. 22 Wrote grub.cfg 23 Installation complete, to new beginnings :) 24 Shutdown 8.215/80.0: 00 mkfs.fat 4.1 (2017-01-24) 01 455 blocks 02 Save complete - wrote rootfs.img and save.tgz 03 Installing for i386-pc platform. 04 grub-install: warning: cannot open directory `//share/locale': No such file or d 05 irectory. 06 Installation finished. No error reported. 07 Wrote grub.cfg 08 Installation complete, to new beginnings :) 09 poweroff 10 i586con ~ # poweroff 11 i586con ~ # Stopping network: OK 12 Stopping klogd: OK 13 Stopping syslogd: OK 14 umount: tmpfs busy - remounted read-only 15 umount: overlay busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: /dev/sr0 busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 The system is going down NOW! 20 Sent SIGTERM to all processes 21 Sent SIGKILL to all processes 22 Requesting system poweroff 23 [ 156.117632] reboot: Power down 24 === SUMMARY for 05-install-cd-fat === total time | wait time | event 3.4s | 3.4s | bootloader 59.6s | 55.9s | login prompt 65.3s | 5.3s | logged in 71.8s | 3.3s | fdisk complete 157.7s | 81.8s | install complete 166.6s | | Shutdown === HTML: 05-install-cd-fat.html Event GRUB 8.112/20: 00 01 GNU GRUB version 2.04 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 4s. 23 24 Event login prompt 62.188/200: 00 [ 12.647829] zram: Added device: zram0 01 [ 12.691747] zram0: detected capacity change from 0 to 32768 02 Setting up swapspace version 1, size = 16773120 bytes 03 [ 12.835752] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 04 6380k SS 05 Media found and mounted. 06 Unpacking save.tgz... 07 Copying read-only image to RAM... 08 Setting up overlay... 09 [ 19.097798] loop0: detected capacity change from 0 to 56553 10 [ 19.104099] loop0: detected capacity change from 56553 to 56552 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 5.337/40: 00 [ 12.691747] zram0: detected capacity change from 0 to 32768 01 Setting up swapspace version 1, size = 16773120 bytes 02 [ 12.835752] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 03 6380k SS 04 Media found and mounted. 05 Unpacking save.tgz... 06 Copying read-only image to RAM... 07 Setting up overlay... 08 [ 19.097798] loop0: detected capacity change from 0 to 56553 09 [ 19.104099] loop0: detected capacity change from 56553 to 56552 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 8.649/80.0: 00 Launching net_daemon.sh 01 Populating /dev using udev: done 02 Starting network: OK 03 Starting gpm (eventually, maybe) 04 05 Login as root or user (no password). 06 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 07 08 Welcome! (/dev/tty1) 09 10 i586con login: root 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: none busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 06-hdboot-fat === total time | wait time | event 8.1s | 8.1s | GRUB 70.4s | 62.2s | login prompt 76.2s | 5.3s | logged in 85.5s | | Shutdown === HTML: 06-hdboot-fat.html Event GRUB 7.991/20: 00 01 GNU GRUB version 2.04 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 4s. 23 24 Event login prompt 78.390/200: 00 [ 4.955162] Freeing initrd memory: 4096K 01 [ 5.333631] Freeing initrd memory: 3832K 02 [ 6.545455] Freeing unused kernel image (initmem) memory: 308K 03 [ 6.549916] Write protecting kernel text and read-only data: 2884k 04 [ 6.552685] Run /init as init process 05 [ 7.334344] loop0: detected capacity change from 0 to 56552 06 [ 10.281019] zram: Added device: zram0 07 [ 11.082857] zram0: detected capacity change from 0 to 32768 08 Setting up swapspace version 1, size = 16773120 bytes 09 [ 11.251753] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 10 6380k SS 11 [ 13.360433] random: crng init done 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 6.817/40: 00 [ 5.333631] Freeing initrd memory: 3832K 01 [ 6.545455] Freeing unused kernel image (initmem) memory: 308K 02 [ 6.549916] Write protecting kernel text and read-only data: 2884k 03 [ 6.552685] Run /init as init process 04 [ 7.334344] loop0: detected capacity change from 0 to 56552 05 [ 10.281019] zram: Added device: zram0 06 [ 11.082857] zram0: detected capacity change from 0 to 32768 07 Setting up swapspace version 1, size = 16773120 bytes 08 [ 11.251753] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 09 6380k SS 10 [ 13.360433] random: crng init done 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 8.582/80.0: 00 Launching net_daemon.sh 01 Populating /dev using udev: done 02 Starting network: OK 03 Starting gpm (eventually, maybe) 04 05 Login as root or user (no password). 06 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 07 08 Welcome! (/dev/tty1) 09 10 i586con login: root 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 umount: can't unmount /: Invalid argument 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 07-hdboot-fat-b2r === total time | wait time | event 8.0s | 8.0s | GRUB 86.6s | 78.4s | login prompt 93.9s | 6.8s | logged in 103.2s | | Shutdown === HTML: 07-hdboot-fat-b2r.html