Test results will be written into 'releases/testresults/2022.02.6-2022-10-13-0df13446' Event bootloader 4.374/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 139.401/200: 00 B) 01 [ 16.990630] sd 2:0:0:0: [sda] Write Protect is off 02 [ 17.022910] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does 03 n't support DPO or FUA 04 [ 17.160646] random: crng init done 05 [ 17.202523] sda: sda1 06 [ 17.290791] sd 2:0:0:0: [sda] Attached SCSI disk 07 Media found and mounted. 08 Unpacking save.tgz... 09 Setting up overlay... 10 [ 19.057509] loop0: detected capacity change from 0 to 57290 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 2.321/40: 00 [ 16.990630] sd 2:0:0:0: [sda] Write Protect is off 01 [ 17.022910] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does 02 n't support DPO or FUA 03 [ 17.160646] random: crng init done 04 [ 17.202523] sda: sda1 05 [ 17.290791] sd 2:0:0:0: [sda] Attached SCSI disk 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 19.057509] loop0: detected capacity change from 0 to 57290 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 35.746/80.0: 00 Launching net_daemon.sh 01 Populating /dev using udev: done 02 Starting network: OK 03 Starting gpm (eventually, maybe) 04 05 Login as root or user (no password). 06 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 07 08 Welcome! (/dev/tty1) 09 10 i586con login: root 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sda busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 01-lowram-usb === total time | wait time | event 4.4s | 4.4s | bootloader 144.0s | 139.4s | login prompt 146.8s | 2.3s | logged in 183.2s | | Shutdown === HTML: 01-lowram-usb.html Event bootloader 4.118/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 71.419/200: 00 [ 13.083859] zram0: detected capacity change from 0 to 32768 01 Setting up swapspace version 1, size = 16773120 bytes 02 [ 13.254815] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 03 6380k SS 04 Media found and mounted. 05 Unpacking save.tgz... 06 Copying read-only image to RAM... 07 [ 17.223269] random: crng init done 08 Setting up overlay... 09 [ 19.126189] loop0: detected capacity change from 0 to 57009 10 [ 19.134942] loop0: detected capacity change from 57009 to 57008 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 9.241/40: 00 Setting up swapspace version 1, size = 16773120 bytes 01 [ 13.254815] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 02 6380k SS 03 Media found and mounted. 04 Unpacking save.tgz... 05 Copying read-only image to RAM... 06 [ 17.223269] random: crng init done 07 Setting up overlay... 08 [ 19.126189] loop0: detected capacity change from 0 to 57009 09 [ 19.134942] loop0: detected capacity change from 57009 to 57008 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: user 24 user@i586con ~ $ Event ssh key entered 1.051/10: 00 [ 19.126189] loop0: detected capacity change from 0 to 57009 01 [ 19.134942] loop0: detected capacity change from 57009 to 57008 02 Switching to main /sbin/init 03 Starting syslogd: OK 04 Starting klogd: OK 05 Launching net_daemon.sh 06 Populating /dev using udev: done 07 Starting network: OK 08 Starting gpm (eventually, maybe) 09 10 Login as root or user (no password). 11 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 12 13 Welcome! (/dev/tty1) 14 15 i586con login: user 16 user@i586con ~ $ mkdir -p .ssh 17 echo 'user@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZasV 18 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 19 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 20 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 21 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 22 V8B urjaman@phenom' > .ssh/authorized_keys 23 user@i586con ~ $ cd .ssh 24 user@i586con ~/.ssh $ Event sshd started 6.644/400: 00 Switching to main /sbin/init 01 Starting syslogd: OK 02 Starting klogd: OK 03 Launching net_daemon.sh 04 Populating /dev using udev: done 05 Starting network: OK 06 Starting gpm (eventually, maybe) 07 08 Login as root or user (no password). 09 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 10 11 Welcome! (/dev/tty1) 12 13 i586con login: user 14 user@i586con ~ $ mkdir -p .ssh 15 echo 'user@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZasV 16 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 17 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 18 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 19 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 20 V8B urjaman@phenom' > .ssh/authorized_keys 21 user@i586con ~ $ cd .ssh 22 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 23 377 24 user@i586con / $ Warning: Permanently added '[127.0.0.1]:1586' (ED25519) to the list of known hosts. Event ssh test complete 1.011/30.0: 00 Switching to main /sbin/init 01 Starting syslogd: OK 02 Starting klogd: OK 03 Launching net_daemon.sh 04 Populating /dev using udev: done 05 Starting network: OK 06 Starting gpm (eventually, maybe) 07 08 Login as root or user (no password). 09 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 10 11 Welcome! (/dev/tty1) 12 13 i586con login: user 14 user@i586con ~ $ mkdir -p .ssh 15 echo 'user@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZasV 16 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 17 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 18 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 19 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 20 V8B urjaman@phenom' > .ssh/authorized_keys 21 user@i586con ~ $ cd .ssh 22 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 23 377 24 user@i586con / $ Shutdown 9.442/80.0: 00 01 i586con login: user 02 user@i586con ~ $ mkdir -p .ssh 03 echo 'user@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZasV 04 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 05 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 06 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 07 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 08 V8B urjaman@phenom' > .ssh/authorized_keys 09 user@i586con ~ $ cd .ssh 10 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 11 377 12 user@i586con / $ su -c poweroff 13 user@i586con / $ Stopping network: OK 14 Stopping klogd: OK 15 Stopping syslogd: OK 16 umount: tmpfs busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: none busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 02-network-ssh === total time | wait time | event 4.1s | 4.1s | bootloader 75.6s | 71.4s | login prompt 85.3s | 9.2s | logged in 120.7s | 1.1s | ssh key entered 131.4s | 6.6s | sshd started 140.3s | 1.0s | ssh test complete 150.9s | | Shutdown === HTML: 02-network-ssh.html Formatting 'cursed.qcow', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=1073741824 lazy_refcounts=off refcount_bits=16 Event bootloader 4.049/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 73.001/200: 00 [ 4.890916] Freeing initrd memory: 4096K 01 [ 5.251579] Freeing initrd memory: 4096K 02 [ 5.577527] Freeing initrd memory: 4072K 03 [ 6.682367] Freeing unused kernel image (initmem) memory: 308K 04 [ 6.693749] Write protecting kernel text and read-only data: 2872k 05 [ 6.696392] Run /init as init process 06 [ 7.435305] loop0: detected capacity change from 0 to 57008 07 [ 10.152920] zram: Added device: zram0 08 [ 11.161785] zram0: detected capacity change from 0 to 32768 09 Setting up swapspace version 1, size = 16773120 bytes 10 [ 11.323741] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 11 6380k SS 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 6.863/20: 00 [ 5.251579] Freeing initrd memory: 4096K 01 [ 5.577527] Freeing initrd memory: 4072K 02 [ 6.682367] Freeing unused kernel image (initmem) memory: 308K 03 [ 6.693749] Write protecting kernel text and read-only data: 2872k 04 [ 6.696392] Run /init as init process 05 [ 7.435305] loop0: detected capacity change from 0 to 57008 06 [ 10.152920] zram: Added device: zram0 07 [ 11.161785] zram0: detected capacity change from 0 to 32768 08 Setting up swapspace version 1, size = 16773120 bytes 09 [ 11.323741] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 10 6380k SS 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Event fdisk complete 3.461/30.0: 00 01 i586con login: root 02 i586con ~ # printf 'n\n\n\n\n\nw\n' | fdisk /dev/sda 03 04 Welcome to fdisk (util-linux 2.37.4). 05 Changes will remain in memory only, until you decide to write them. 06 Be careful before using the write command. 07 08 Device does not contain a recognized partition table. 09 Created a new DOS disklabel with disk identifier 0xa163b32f. 10 11 Command (m for help): Partition type 12 p primary (0 primary, 0 extended, 4 free) 13 e extended (container for logical partitions) 14 Select (default p): 15 Using default response p. 16 Partition number (1-4, default 1): First sector (2048-2097151, default 2048): La 17 st sector, +/-sectors or +/-size{K,M,G,T,P} (2048-2097151, default 2097151): 18 Created a new partition 1 of type 'Linux' and of size 1023 MiB. 19 20 Command (m for help): The partition table has been altered. 21 Calling ioctl() to re-read partition table. 22 Syncing disks. 23 24 i586con ~ # Event install complete 165.849/240: 00 Current filesystem (if any) cannot be used. 01 Choose the filesystem to format to (e[xt4]/[v]fat or quit): Filesystem chosen: e 02 xt4 03 The filesystem needs a label. 04 Label [I586CON_BOOT]: Label chosen: I586CON_BOOT 05 The given disk partition will be ERASED, check that it is correct. 06 Type yes to continue: Continuing in 3 seconds 07 mke2fs 1.46.5 (30-Dec-2021) 08 Discarding device blocks: done 09 Creating filesystem with 261888 4k blocks and 65536 inodes 10 Filesystem UUID: f9812bcd-12d3-42aa-91e2-43611269f7f4 11 Superblock backups stored on blocks: 12 32768, 98304, 163840, 229376 13 14 Allocating group tables: done 15 Writing inode tables: done 16 Creating journal (4096 blocks): done 17 Writing superblocks and filesystem accounting information: done 18 19 Save complete - wrote rootfs.img and save.tgz 20 Installing for i386-pc platform. 21 Installation finished. No error reported. 22 Wrote grub.cfg 23 Installation complete, to new beginnings :) 24 Shutdown 11.432/80.0: 00 Allocating group tables: done 01 Writing inode tables: done 02 Creating journal (4096 blocks): done 03 Writing superblocks and filesystem accounting information: done 04 05 Save complete - wrote rootfs.img and save.tgz 06 Installing for i386-pc platform. 07 Installation finished. No error reported. 08 Wrote grub.cfg 09 Installation complete, to new beginnings :) 10 poweroff 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 umount: can't unmount /: Invalid argument 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 03-install-b2r-ext === total time | wait time | event 4.0s | 4.0s | bootloader 77.5s | 73.0s | login prompt 84.8s | 6.9s | logged in 91.4s | 3.5s | fdisk complete 261.3s | 165.8s | install complete 273.5s | | Shutdown === HTML: 03-install-b2r-ext.html Event GRUB 8.895/20: 00 01 GNU GRUB version 2.04 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 4s. 23 24 Event login prompt 70.717/200: 00 [ 13.324879] zram0: detected capacity change from 0 to 32768 01 Setting up swapspace version 1, size = 16773120 bytes 02 [ 13.466887] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 03 6380k SS 04 [ 15.079593] random: crng init done 05 [ 15.248594] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 06 (null). Quota mode: disabled. 07 Media found and mounted. 08 Unpacking save.tgz... 09 Setting up overlay... 10 [ 15.693808] loop0: detected capacity change from 0 to 57292 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 5.178/40: 00 Setting up swapspace version 1, size = 16773120 bytes 01 [ 13.466887] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 02 6380k SS 03 [ 15.079593] random: crng init done 04 [ 15.248594] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 05 (null). Quota mode: disabled. 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 15.693808] loop0: detected capacity change from 0 to 57292 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 9.265/80.0: 00 Launching net_daemon.sh 01 Populating /dev using udev: done 02 Starting network: OK 03 Starting gpm (eventually, maybe) 04 05 Login as root or user (no password). 06 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 07 08 Welcome! (/dev/tty1) 09 10 i586con login: root 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sda1 busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 04-hdboot-ext-cdl === total time | wait time | event 8.9s | 8.9s | GRUB 79.8s | 70.7s | login prompt 85.4s | 5.2s | logged in 95.4s | | Shutdown === HTML: 04-hdboot-ext-cdl.html Formatting 'cursed.qcow', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=419430400 lazy_refcounts=off refcount_bits=16 Event bootloader 4.010/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 66.509/200: 00 [ 7.417796] sd 0:0:0:0: [sda] Attached SCSI disk 01 [ 12.907932] zram: Added device: zram0 02 [ 12.950057] zram0: detected capacity change from 0 to 32768 03 Setting up swapspace version 1, size = 16773120 bytes 04 [ 13.100786] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 05 6380k SS 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 14.745652] loop0: detected capacity change from 0 to 57290 10 Switching to main /sbin/init 11 [ 16.199355] random: crng init done 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 2.265/20: 00 [ 12.907932] zram: Added device: zram0 01 [ 12.950057] zram0: detected capacity change from 0 to 32768 02 Setting up swapspace version 1, size = 16773120 bytes 03 [ 13.100786] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 04 6380k SS 05 Media found and mounted. 06 Unpacking save.tgz... 07 Setting up overlay... 08 [ 14.745652] loop0: detected capacity change from 0 to 57290 09 Switching to main /sbin/init 10 [ 16.199355] random: crng init done 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Event fdisk complete 3.683/30.0: 00 01 i586con login: root 02 i586con ~ # printf 'n\n\n\n\n\nw\n' | fdisk /dev/sda 03 04 Welcome to fdisk (util-linux 2.37.4). 05 Changes will remain in memory only, until you decide to write them. 06 Be careful before using the write command. 07 08 Device does not contain a recognized partition table. 09 Created a new DOS disklabel with disk identifier 0xe9bbb5f3. 10 11 Command (m for help): Partition type 12 p primary (0 primary, 0 extended, 4 free) 13 e extended (container for logical partitions) 14 Select (default p): 15 Using default response p. 16 Partition number (1-4, default 1): First sector (2048-819199, default 2048): Las 17 t sector, +/-sectors or +/-size{K,M,G,T,P} (2048-819199, default 819199): 18 Created a new partition 1 of type 'Linux' and of size 399 MiB. 19 20 Command (m for help): The partition table has been altered. 21 Calling ioctl() to re-read partition table. 22 Syncing disks. 23 24 i586con ~ # Event install complete 80.101/240: 00 Command (m for help): The partition table has been altered. 01 Calling ioctl() to re-read partition table. 02 Syncing disks. 03 04 i586con ~ # printf 'fat\n\nyes\n' | hdinstall /dev/sda1 /dev/sda 05 This is the device to be used: 06 Device /dev/sda1 is a 399.0 MiB partition 1 07 Disk Vendor/Type: ATA 08 Disk Model: QEMU HARDDISK 09 Disk Size: 0.391 GiB 10 Current filesystem (if any) cannot be used. 11 Choose the filesystem to format to (e[xt4]/[v]fat or quit): Filesystem chosen: v 12 fat 13 The filesystem needs a label. 14 Label [I586CONBT]: Label chosen: I586CONBT 15 The given disk partition will be ERASED, check that it is correct. 16 Type yes to continue: Continuing in 3 seconds 17 mkfs.fat 4.2 (2021-01-31) 18 487 blocks 19 Save complete - wrote rootfs.img and save.tgz 20 Installing for i386-pc platform. 21 Installation finished. No error reported. 22 Wrote grub.cfg 23 Installation complete, to new beginnings :) 24 Shutdown 9.117/80.0: 00 The filesystem needs a label. 01 Label [I586CONBT]: Label chosen: I586CONBT 02 The given disk partition will be ERASED, check that it is correct. 03 Type yes to continue: Continuing in 3 seconds 04 mkfs.fat 4.2 (2021-01-31) 05 487 blocks 06 Save complete - wrote rootfs.img and save.tgz 07 Installing for i386-pc platform. 08 Installation finished. No error reported. 09 Wrote grub.cfg 10 Installation complete, to new beginnings :) 11 powi586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sr0 busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 05-install-cd-fat === total time | wait time | event 4.0s | 4.0s | bootloader 70.8s | 66.5s | login prompt 73.5s | 2.3s | logged in 80.3s | 3.7s | fdisk complete 164.5s | 80.1s | install complete 174.3s | | Shutdown === HTML: 05-install-cd-fat.html Event GRUB 9.926/20: 00 01 GNU GRUB version 2.04 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 3s. 23 24 Event login prompt 77.230/200: 00 [ 12.995918] zram0: detected capacity change from 0 to 32768 01 Setting up swapspace version 1, size = 16773120 bytes 02 [ 13.148887] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 03 6380k SS 04 [ 14.516670] random: crng init done 05 Media found and mounted. 06 Unpacking save.tgz... 07 Copying read-only image to RAM... 08 Setting up overlay... 09 [ 19.178930] loop0: detected capacity change from 0 to 57009 10 [ 19.187960] loop0: detected capacity change from 57009 to 57008 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 3.042/40: 00 Setting up swapspace version 1, size = 16773120 bytes 01 [ 13.148887] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 02 6380k SS 03 [ 14.516670] random: crng init done 04 Media found and mounted. 05 Unpacking save.tgz... 06 Copying read-only image to RAM... 07 Setting up overlay... 08 [ 19.178930] loop0: detected capacity change from 0 to 57009 09 [ 19.187960] loop0: detected capacity change from 57009 to 57008 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 10.017/80.0: 00 Launching net_daemon.sh 01 Populating /dev using udev: done 02 Starting network: OK 03 Starting gpm (eventually, maybe) 04 05 Login as root or user (no password). 06 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 07 08 Welcome! (/dev/tty1) 09 10 i586con login: root 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: none busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 06-hdboot-fat === total time | wait time | event 9.9s | 9.9s | GRUB 87.3s | 77.2s | login prompt 90.7s | 3.0s | logged in 101.4s | | Shutdown === HTML: 06-hdboot-fat.html Event GRUB 9.006/20: 00 01 GNU GRUB version 2.04 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 4s. 23 24 Event login prompt 92.896/200: 00 [ 4.470284] Freeing initrd memory: 4096K 01 [ 4.815039] Freeing initrd memory: 4096K 02 [ 5.163990] Freeing initrd memory: 4072K 03 [ 6.356822] Freeing unused kernel image (initmem) memory: 308K 04 [ 6.363869] Write protecting kernel text and read-only data: 2872k 05 [ 6.366836] Run /init as init process 06 [ 7.172707] loop0: detected capacity change from 0 to 57008 07 [ 10.425276] zram: Added device: zram0 08 [ 11.437083] zram0: detected capacity change from 0 to 32768 09 Setting up swapspace version 1, size = 16773120 bytes 10 [ 11.610184] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 11 6380k SS 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 8.579/40: 00 [ 4.815039] Freeing initrd memory: 4096K 01 [ 5.163990] Freeing initrd memory: 4072K 02 [ 6.356822] Freeing unused kernel image (initmem) memory: 308K 03 [ 6.363869] Write protecting kernel text and read-only data: 2872k 04 [ 6.366836] Run /init as init process 05 [ 7.172707] loop0: detected capacity change from 0 to 57008 06 [ 10.425276] zram: Added device: zram0 07 [ 11.437083] zram0: detected capacity change from 0 to 32768 08 Setting up swapspace version 1, size = 16773120 bytes 09 [ 11.610184] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 10 6380k SS 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 9.111/80.0: 00 Launching net_daemon.sh 01 Populating /dev using udev: done 02 Starting network: OK 03 Starting gpm (eventually, maybe) 04 05 Login as root or user (no password). 06 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 07 08 Welcome! (/dev/tty1) 09 10 i586con login: root 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 umount: can't unmount /: Invalid argument 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 07-hdboot-fat-b2r === total time | wait time | event 9.0s | 9.0s | GRUB 102.2s | 92.9s | login prompt 111.2s | 8.6s | logged in 121.0s | | Shutdown === HTML: 07-hdboot-fat-b2r.html