Test results will be written into 'releases/testresults/2022.02.6-2022-10-16-a4c89041' Event bootloader 4.422/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 149.838/200: 00 [ 17.587836] sd 2:0:0:0: [sda] 73728 512-byte logical blocks: (37.7 MB/36.0 Mi 01 B) 02 [ 17.607868] sd 2:0:0:0: [sda] Write Protect is off 03 [ 17.627809] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does 04 n't support DPO or FUA 05 [ 17.797799] sda: sda1 06 [ 17.886974] sd 2:0:0:0: [sda] Attached SCSI disk 07 Media found and mounted. 08 Unpacking save.tgz... 09 Setting up overlay... 10 [ 19.737576] loop0: detected capacity change from 0 to 57290 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 2.357/40: 00 B) 01 [ 17.607868] sd 2:0:0:0: [sda] Write Protect is off 02 [ 17.627809] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does 03 n't support DPO or FUA 04 [ 17.797799] sda: sda1 05 [ 17.886974] sd 2:0:0:0: [sda] Attached SCSI disk 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 19.737576] loop0: detected capacity change from 0 to 57290 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 35.046/80.0: 00 Launching net_daemon.sh 01 Populating /dev using udev: done 02 Starting network: OK 03 Starting gpm (eventually, maybe) 04 05 Login as root or user (no password). 06 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 07 08 Welcome! (/dev/tty1) 09 10 i586con login: root 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sda busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 01-lowram-usb === total time | wait time | event 4.4s | 4.4s | bootloader 154.5s | 149.8s | login prompt 157.3s | 2.4s | logged in 193.1s | | Shutdown === HTML: 01-lowram-usb.html Event bootloader 4.124/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 75.010/200: 00 [ 13.643632] zram0: detected capacity change from 0 to 32768 01 Setting up swapspace version 1, size = 16773120 bytes 02 [ 13.817027] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 03 6380k SS 04 Media found and mounted. 05 Unpacking save.tgz... 06 Copying read-only image to RAM... 07 [ 16.979022] random: crng init done 08 Setting up overlay... 09 [ 19.978505] loop0: detected capacity change from 0 to 57009 10 [ 19.986781] loop0: detected capacity change from 57009 to 57008 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 9.429/40: 00 Setting up swapspace version 1, size = 16773120 bytes 01 [ 13.817027] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 02 6380k SS 03 Media found and mounted. 04 Unpacking save.tgz... 05 Copying read-only image to RAM... 06 [ 16.979022] random: crng init done 07 Setting up overlay... 08 [ 19.978505] loop0: detected capacity change from 0 to 57009 09 [ 19.986781] loop0: detected capacity change from 57009 to 57008 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: user 24 user@i586con ~ $ Event ssh key entered 1.051/10: 00 [ 19.978505] loop0: detected capacity change from 0 to 57009 01 [ 19.986781] loop0: detected capacity change from 57009 to 57008 02 Switching to main /sbin/init 03 Starting syslogd: OK 04 Starting klogd: OK 05 Launching net_daemon.sh 06 Populating /dev using udev: done 07 Starting network: OK 08 Starting gpm (eventually, maybe) 09 10 Login as root or user (no password). 11 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 12 13 Welcome! (/dev/tty1) 14 15 i586con login: user 16 user@i586con ~ $ mkdir -p .ssh 17 echo 'suser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZas 18 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 19 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 20 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 21 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 22 V8B urjaman@phenom' > .ssh/authorized_keys 23 user@i586con ~ $ cd .ssh 24 user@i586con ~/.ssh $ Event sshd started 6.711/400: 00 Switching to main /sbin/init 01 Starting syslogd: OK 02 Starting klogd: OK 03 Launching net_daemon.sh 04 Populating /dev using udev: done 05 Starting network: OK 06 Starting gpm (eventually, maybe) 07 08 Login as root or user (no password). 09 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 10 11 Welcome! (/dev/tty1) 12 13 i586con login: user 14 user@i586con ~ $ mkdir -p .ssh 15 echo 'suser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZas 16 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 17 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 18 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 19 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 20 V8B urjaman@phenom' > .ssh/authorized_keys 21 user@i586con ~ $ cd .ssh 22 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 23 377 24 user@i586con / $ Warning: Permanently added '[127.0.0.1]:1586' (ED25519) to the list of known hosts. Event ssh test complete 1.011/30.0: 00 Switching to main /sbin/init 01 Starting syslogd: OK 02 Starting klogd: OK 03 Launching net_daemon.sh 04 Populating /dev using udev: done 05 Starting network: OK 06 Starting gpm (eventually, maybe) 07 08 Login as root or user (no password). 09 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 10 11 Welcome! (/dev/tty1) 12 13 i586con login: user 14 user@i586con ~ $ mkdir -p .ssh 15 echo 'suser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZas 16 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 17 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 18 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 19 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 20 V8B urjaman@phenom' > .ssh/authorized_keys 21 user@i586con ~ $ cd .ssh 22 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 23 377 24 user@i586con / $ Shutdown 9.418/80.0: 00 01 i586con login: user 02 user@i586con ~ $ mkdir -p .ssh 03 echo 'suser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZas 04 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 05 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 06 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 07 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 08 V8B urjaman@phenom' > .ssh/authorized_keys 09 user@i586con ~ $ cd .ssh 10 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 11 377 12 user@i586con / $ su -c poweroff 13 user@i586con / $ Stopping network: OK 14 Stopping klogd: OK 15 Stopping syslogd: OK 16 umount: tmpfs busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: none busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 02-network-ssh === total time | wait time | event 4.1s | 4.1s | bootloader 79.2s | 75.0s | login prompt 89.1s | 9.4s | logged in 124.5s | 1.1s | ssh key entered 135.2s | 6.7s | sshd started 145.5s | 1.0s | ssh test complete 156.1s | | Shutdown === HTML: 02-network-ssh.html Formatting 'cursed.qcow', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=1073741824 lazy_refcounts=off refcount_bits=16 Event bootloader 4.002/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 75.091/200: 00 [ 5.565381] Freeing initrd memory: 4096K 01 [ 5.916345] Freeing initrd memory: 4096K 02 [ 6.252277] Freeing initrd memory: 4072K 03 [ 7.427105] Freeing unused kernel image (initmem) memory: 308K 04 [ 7.436587] Write protecting kernel text and read-only data: 2872k 05 [ 7.439122] Run /init as init process 06 [ 8.186055] loop0: detected capacity change from 0 to 57008 07 [ 10.849678] zram: Added device: zram0 08 [ 11.850504] zram0: detected capacity change from 0 to 32768 09 Setting up swapspace version 1, size = 16773120 bytes 10 [ 12.011461] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 11 6380k SS 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 5.965/20: 00 [ 5.916345] Freeing initrd memory: 4096K 01 [ 6.252277] Freeing initrd memory: 4072K 02 [ 7.427105] Freeing unused kernel image (initmem) memory: 308K 03 [ 7.436587] Write protecting kernel text and read-only data: 2872k 04 [ 7.439122] Run /init as init process 05 [ 8.186055] loop0: detected capacity change from 0 to 57008 06 [ 10.849678] zram: Added device: zram0 07 [ 11.850504] zram0: detected capacity change from 0 to 32768 08 Setting up swapspace version 1, size = 16773120 bytes 09 [ 12.011461] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 10 6380k SS 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Event fdisk complete 4.444/30.0: 00 01 i586con login: root 02 i586con ~ # printf 'n\n\n\n\n\nw\n' | fdisk /dev/sda 03 04 Welcome to fdisk (util-linux 2.37.4). 05 Changes will remain in memory only, until you decide to write them. 06 Be careful before using the write command. 07 08 Device does not contain a recognized partition table. 09 Created a new DOS disklabel with disk identifier 0xc16ae1e4. 10 11 Command (m for help): Partition type 12 p primary (0 primary, 0 extended, 4 free) 13 e extended (container for logical partitions) 14 Select (default p): 15 Using default response p. 16 Partition number (1-4, default 1): First sector (2048-2097151, default 2048): La 17 st sector, +/-sectors or +/-size{K,M,G,T,P} (2048-2097151, default 2097151): 18 Created a new partition 1 of type 'Linux' and of size 1023 MiB. 19 20 Command (m for help): The partition table has been altered. 21 Calling ioctl() to re-read partition table. 22 Syncing disks. 23 24 i586con ~ # Event install complete 130.084/240: 00 Current filesystem (if any) cannot be used. 01 Choose the filesystem to format to (e[xt4]/[v]fat or quit): Filesystem chosen: e 02 xt4 03 The filesystem needs a label. 04 Label [I586CON_BOOT]: Label chosen: I586CON_BOOT 05 The given disk partition will be ERASED, check that it is correct. 06 Type yes to continue: Continuing in 3 seconds 07 mke2fs 1.46.5 (30-Dec-2021) 08 Discarding device blocks: done 09 Creating filesystem with 261888 4k blocks and 65536 inodes 10 Filesystem UUID: 8c6692da-ddca-4665-a27e-ca4a8366e852 11 Superblock backups stored on blocks: 12 32768, 98304, 163840, 229376 13 14 Allocating group tables: done 15 Writing inode tables: done 16 Creating journal (4096 blocks): done 17 Writing superblocks and filesystem accounting information: done 18 19 Save complete - wrote rootfs.img and save.tgz 20 Installing for i386-pc platform. 21 Installation finished. No error reported. 22 Wrote grub.cfg 23 Installation complete, to new beginnings :) 24 Shutdown 12.019/80.0: 00 Allocating group tables: done 01 Writing inode tables: done 02 Creating journal (4096 blocks): done 03 Writing superblocks and filesystem accounting information: done 04 05 Save complete - wrote rootfs.img and save.tgz 06 Installing for i386-pc platform. 07 Installation finished. No error reported. 08 Wrote grub.cfg 09 Installation complete, to new beginnings :) 10 poweroff 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 umount: can't unmount /: Invalid argument 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 03-install-b2r-ext === total time | wait time | event 4.0s | 4.0s | bootloader 79.5s | 75.1s | login prompt 85.9s | 6.0s | logged in 93.5s | 4.4s | fdisk complete 227.7s | 130.1s | install complete 240.4s | | Shutdown === HTML: 03-install-b2r-ext.html Event GRUB 9.059/20: 00 01 GNU GRUB version 2.04 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 4s. 23 24 Event login prompt 72.664/200: 00 [ 13.643022] zram0: detected capacity change from 0 to 32768 01 Setting up swapspace version 1, size = 16773120 bytes 02 [ 13.832047] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 03 6380k SS 04 [ 15.049765] random: crng init done 05 [ 15.654691] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 06 (null). Quota mode: disabled. 07 Media found and mounted. 08 Unpacking save.tgz... 09 Setting up overlay... 10 [ 16.124614] loop0: detected capacity change from 0 to 57292 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 4.041/40: 00 Setting up swapspace version 1, size = 16773120 bytes 01 [ 13.832047] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 02 6380k SS 03 [ 15.049765] random: crng init done 04 [ 15.654691] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 05 (null). Quota mode: disabled. 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 16.124614] loop0: detected capacity change from 0 to 57292 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 9.310/80.0: 00 Launching net_daemon.sh 01 Populating /dev using udev: done 02 Starting network: OK 03 Starting gpm (eventually, maybe) 04 05 Login as root or user (no password). 06 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 07 08 Welcome! (/dev/tty1) 09 10 i586con login: root 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sda1 busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 04-hdboot-ext-cdl === total time | wait time | event 9.1s | 9.1s | GRUB 81.9s | 72.7s | login prompt 86.4s | 4.0s | logged in 96.4s | | Shutdown === HTML: 04-hdboot-ext-cdl.html Formatting 'cursed.qcow', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=419430400 lazy_refcounts=off refcount_bits=16 Event bootloader 4.018/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 67.762/200: 00 [ 7.640162] sd 0:0:0:0: [sda] Attached SCSI disk 01 [ 13.309085] zram: Added device: zram0 02 [ 13.348977] zram0: detected capacity change from 0 to 32768 03 Setting up swapspace version 1, size = 16773120 bytes 04 [ 13.491964] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 05 6380k SS 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 15.224879] loop0: detected capacity change from 0 to 57290 10 Switching to main /sbin/init 11 [ 16.015061] random: crng init done 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 3.411/20: 00 [ 13.309085] zram: Added device: zram0 01 [ 13.348977] zram0: detected capacity change from 0 to 32768 02 Setting up swapspace version 1, size = 16773120 bytes 03 [ 13.491964] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 04 6380k SS 05 Media found and mounted. 06 Unpacking save.tgz... 07 Setting up overlay... 08 [ 15.224879] loop0: detected capacity change from 0 to 57290 09 Switching to main /sbin/init 10 [ 16.015061] random: crng init done 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Event fdisk complete 4.359/30.0: 00 01 i586con login: root 02 i586con ~ # printf 'n\n\n\n\n\nw\n' | fdisk /dev/sda 03 04 Welcome to fdisk (util-linux 2.37.4). 05 Changes will remain in memory only, until you decide to write them. 06 Be careful before using the write command. 07 08 Device does not contain a recognized partition table. 09 Created a new DOS disklabel with disk identifier 0x653cc14c. 10 11 Command (m for help): Partition type 12 p primary (0 primary, 0 extended, 4 free) 13 e extended (container for logical partitions) 14 Select (default p): 15 Using default response p. 16 Partition number (1-4, default 1): First sector (2048-819199, default 2048): Las 17 t sector, +/-sectors or +/-size{K,M,G,T,P} (2048-819199, default 819199): 18 Created a new partition 1 of type 'Linux' and of size 399 MiB. 19 20 Command (m for help): The partition table has been altered. 21 Calling ioctl() to re-read partition table. 22 Syncing disks. 23 24 i586con ~ # Event install complete 81.164/240: 00 Command (m for help): The partition table has been altered. 01 Calling ioctl() to re-read partition table. 02 Syncing disks. 03 04 i586con ~ # printf 'fat\n\nyes\n' | hdinstall /dev/sda1 /dev/sda 05 This is the device to be used: 06 Device /dev/sda1 is a 399.0 MiB partition 1 07 Disk Vendor/Type: ATA 08 Disk Model: QEMU HARDDISK 09 Disk Size: 0.391 GiB 10 Current filesystem (if any) cannot be used. 11 Choose the filesystem to format to (e[xt4]/[v]fat or quit): Filesystem chosen: v 12 fat 13 The filesystem needs a label. 14 Label [I586CONBT]: Label chosen: I586CONBT 15 The given disk partition will be ERASED, check that it is correct. 16 Type yes to continue: Continuing in 3 seconds 17 mkfs.fat 4.2 (2021-01-31) 18 487 blocks 19 Save complete - wrote rootfs.img and save.tgz 20 Installing for i386-pc platform. 21 Installation finished. No error reported. 22 Wrote grub.cfg 23 Installation complete, to new beginnings :) 24 Shutdown 9.136/80.0: 00 Label [I586CONBT]: Label chosen: I586CONBT 01 The given disk partition will be ERASED, check that it is correct. 02 Type yes to continue: Continuing in 3 seconds 03 mkfs.fat 4.2 (2021-01-31) 04 487 blocks 05 Save complete - wrote rootfs.img and save.tgz 06 Installing for i386-pc platform. 07 Installation finished. No error reported. 08 Wrote grub.cfg 09 Installation complete, to new beginnings :) 10 poweroff 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sr0 busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 05-install-cd-fat === total time | wait time | event 4.0s | 4.0s | bootloader 72.0s | 67.8s | login prompt 75.9s | 3.4s | logged in 83.4s | 4.4s | fdisk complete 168.7s | 81.2s | install complete 178.5s | | Shutdown === HTML: 05-install-cd-fat.html Event GRUB 8.037/20: 00 01 GNU GRUB version 2.04 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 5s. 23 24 Event login prompt 78.985/200: 00 [ 13.546488] zram0: detected capacity change from 0 to 32768 01 Setting up swapspace version 1, size = 16773120 bytes 02 [ 13.695261] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 03 6380k SS 04 [ 15.050942] random: crng init done 05 Media found and mounted. 06 Unpacking save.tgz... 07 Copying read-only image to RAM... 08 Setting up overlay... 09 [ 19.806532] loop0: detected capacity change from 0 to 57009 10 [ 19.815180] loop0: detected capacity change from 57009 to 57008 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 2.865/40: 00 Setting up swapspace version 1, size = 16773120 bytes 01 [ 13.695261] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 02 6380k SS 03 [ 15.050942] random: crng init done 04 Media found and mounted. 05 Unpacking save.tgz... 06 Copying read-only image to RAM... 07 Setting up overlay... 08 [ 19.806532] loop0: detected capacity change from 0 to 57009 09 [ 19.815180] loop0: detected capacity change from 57009 to 57008 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 9.541/80.0: 00 Launching net_daemon.sh 01 Populating /dev using udev: done 02 Starting network: OK 03 Starting gpm (eventually, maybe) 04 05 Login as root or user (no password). 06 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 07 08 Welcome! (/dev/tty1) 09 10 i586con login: root 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: none busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 06-hdboot-fat === total time | wait time | event 8.0s | 8.0s | GRUB 87.1s | 79.0s | login prompt 90.4s | 2.9s | logged in 100.7s | | Shutdown === HTML: 06-hdboot-fat.html Event GRUB 7.944/20: 00 01 GNU GRUB version 2.04 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 5s. 23 24 Event login prompt 90.989/200: 00 [ 4.413660] Freeing initrd memory: 4096K 01 [ 4.758552] Freeing initrd memory: 4096K 02 [ 5.173547] Freeing initrd memory: 4072K 03 [ 6.361367] Freeing unused kernel image (initmem) memory: 308K 04 [ 6.365453] Write protecting kernel text and read-only data: 2872k 05 [ 6.368597] Run /init as init process 06 [ 7.191215] loop0: detected capacity change from 0 to 57008 07 [ 10.411826] zram: Added device: zram0 08 [ 11.428620] zram0: detected capacity change from 0 to 32768 09 Setting up swapspace version 1, size = 16773120 bytes 10 [ 11.587832] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 11 6380k SS 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 9.026/40: 00 [ 4.758552] Freeing initrd memory: 4096K 01 [ 5.173547] Freeing initrd memory: 4072K 02 [ 6.361367] Freeing unused kernel image (initmem) memory: 308K 03 [ 6.365453] Write protecting kernel text and read-only data: 2872k 04 [ 6.368597] Run /init as init process 05 [ 7.191215] loop0: detected capacity change from 0 to 57008 06 [ 10.411826] zram: Added device: zram0 07 [ 11.428620] zram0: detected capacity change from 0 to 32768 08 Setting up swapspace version 1, size = 16773120 bytes 09 [ 11.587832] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 10 6380k SS 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 9.358/80.0: 00 Launching net_daemon.sh 01 Populating /dev using udev: done 02 Starting network: OK 03 Starting gpm (eventually, maybe) 04 05 Login as root or user (no password). 06 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 07 08 Welcome! (/dev/tty1) 09 10 i586con login: root 11 i586con ~ # poweroff 12 i586con ~ # Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 umount: can't unmount /: Invalid argument 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 07-hdboot-fat-b2r === total time | wait time | event 7.9s | 7.9s | GRUB 99.2s | 91.0s | login prompt 108.6s | 9.0s | logged in 118.7s | | Shutdown === HTML: 07-hdboot-fat-b2r.html