Test results will be written into 'releases/testresults/2022.02.8-2022-12-12-baaff0f4' Event bootloader 6.898/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 login prompt Timeout 200: 00 [ 20.860082] usb 1-1: Manufacturer: QEMU 01 [ 20.861077] usb 1-1: SerialNumber: 1-0000:00:01.2-1 02 [ 20.895185] usb-storage 1-1:1.0: USB Mass Storage device detected 03 [ 20.922126] scsi host2: usb-storage 1-1:1.0 04 [ 22.024047] scsi 2:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ 05 : 0 ANSI: 5 06 [ 22.062794] sd 2:0:0:0: [sda] 73728 512-byte logical blocks: (37.7 MB/36.0 Mi 07 B) 08 [ 22.077971] sd 2:0:0:0: [sda] Write Protect is off 09 [ 22.105877] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does 10 n't support DPO or FUA 11 [ 22.272935] sda: sda1 12 [ 22.353838] sd 2:0:0:0: [sda] Attached SCSI disk 13 Media found and mounted. 14 Unpacking save.tgz... 15 Setting up overlay... 16 [ 24.526638] loop0: detected capacity change from 0 to 57298 17 Switching to main /sbin/init 18 Starting syslogd: OK 19 Starting klogd: OK 20 Launching net_daemon.sh 21 Populating /dev using udev: done 22 Starting network: OK 23 Starting gpm (eventually, maybe) 24 === SUMMARY for 01-lowram-usb === total time | wait time | event 6.9s | 6.9s | bootloader 208.0s | | login prompt - timeout === HTML: 01-lowram-usb.html