Test results will be written into 'releases/testresults/2023.02.7-2023-11-29-8e4d7ad1' Event bootloader 4.845/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 144.975/200: 00 B) 01 [ 17.543964] sd 2:0:0:0: [sda] Write Protect is off 02 [ 17.579972] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does 03 n't support DPO or FUA 04 [ 17.729896] sda: sda1 05 [ 17.788982] sd 2:0:0:0: [sda] Attached SCSI disk 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 20.058648] loop0: detected capacity change from 0 to 61043 10 Switching to main /sbin/init 11 Saving 256 bits of creditable seed for next boot 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 1.658/40: 00 [ 17.543964] sd 2:0:0:0: [sda] Write Protect is off 01 [ 17.579972] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does 02 n't support DPO or FUA 03 [ 17.729896] sda: sda1 04 [ 17.788982] sd 2:0:0:0: [sda] Attached SCSI disk 05 Media found and mounted. 06 Unpacking save.tgz... 07 Setting up overlay... 08 [ 20.058648] loop0: detected capacity change from 0 to 61043 09 Switching to main /sbin/init 10 Saving 256 bits of creditable seed for next boot 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 31.415/80.0: 00 Starting network: OK 01 Starting gpm (eventually, maybe) 02 03 Login as root or user (no password). 04 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 05 06 Welcome! (/dev/tty1) 07 08 i586con login: root 09 i586con ~ # poweroff 10 i586con ~ # Stopping network: OK 11 Stopping klogd: OK 12 Stopping syslogd: OK 13 Seeding 256 bits and crediting 14 Saving 256 bits of creditable seed for next boot 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sda busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 01-lowram-usb === total time | wait time | event 4.8s | 4.8s | bootloader 150.1s | 145.0s | login prompt 152.2s | 1.7s | logged in 184.3s | | Shutdown === HTML: 01-lowram-usb.html Event bootloader 4.429/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 50.118/200: 00 Setting up swapspace version 1, size = 16773120 bytes 01 [ 13.487420] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 02 6380k SS 03 Media found and mounted. 04 Unpacking save.tgz... 05 Copying read-only image to RAM... 06 [ 16.972993] random: crng init done 07 Setting up overlay... 08 [ 20.514497] loop0: detected capacity change from 0 to 60761 09 [ 20.521426] loop0: detected capacity change from 60761 to 60760 10 Switching to main /sbin/init 11 Saving 256 bits of creditable seed for next boot 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 12.680/40: 00 [ 13.487420] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 01 6380k SS 02 Media found and mounted. 03 Unpacking save.tgz... 04 Copying read-only image to RAM... 05 [ 16.972993] random: crng init done 06 Setting up overlay... 07 [ 20.514497] loop0: detected capacity change from 0 to 60761 08 [ 20.521426] loop0: detected capacity change from 60761 to 60760 09 Switching to main /sbin/init 10 Saving 256 bits of creditable seed for next boot 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: user 24 user@i586con ~ $ Event ssh key entered 1.052/10: 00 [ 20.521426] loop0: detected capacity change from 60761 to 60760 01 Switching to main /sbin/init 02 Saving 256 bits of creditable seed for next boot 03 Starting syslogd: OK 04 Starting klogd: OK 05 Launching net_daemon.sh 06 Populating /dev using udev: done 07 Starting network: OK 08 Starting gpm (eventually, maybe) 09 10 Login as root or user (no password). 11 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 12 13 Welcome! (/dev/tty1) 14 15 i586con login: user 16 user@i586con ~ $ mkdir -p .ssh 17 echouser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZasVPJ 18 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 19 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 20 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 21 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 22 V8B urjaman@phenom' > .ssh/authorized_keys 23 user@i586con ~ $ cd .ssh 24 user@i586con ~/.ssh $ Event sshd started 6.507/400: 00 Saving 256 bits of creditable seed for next boot 01 Starting syslogd: OK 02 Starting klogd: OK 03 Launching net_daemon.sh 04 Populating /dev using udev: done 05 Starting network: OK 06 Starting gpm (eventually, maybe) 07 08 Login as root or user (no password). 09 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 10 11 Welcome! (/dev/tty1) 12 13 i586con login: user 14 user@i586con ~ $ mkdir -p .ssh 15 echouser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZasVPJ 16 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 17 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 18 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 19 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 20 V8B urjaman@phenom' > .ssh/authorized_keys 21 user@i586con ~ $ cd .ssh 22 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 23 376 24 user@i586con / $ Warning: Permanently added '[127.0.0.1]:1586' (ED25519) to the list of known hosts. Event ssh test complete 1.012/30.0: 00 Saving 256 bits of creditable seed for next boot 01 Starting syslogd: OK 02 Starting klogd: OK 03 Launching net_daemon.sh 04 Populating /dev using udev: done 05 Starting network: OK 06 Starting gpm (eventually, maybe) 07 08 Login as root or user (no password). 09 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 10 11 Welcome! (/dev/tty1) 12 13 i586con login: user 14 user@i586con ~ $ mkdir -p .ssh 15 echouser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZasVPJ 16 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 17 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 18 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 19 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 20 V8B urjaman@phenom' > .ssh/authorized_keys 21 user@i586con ~ $ cd .ssh 22 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 23 376 24 user@i586con / $ Shutdown 5.717/80.0: 00 user@i586con ~ $ mkdir -p .ssh 01 echouser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55QZasVPJ 02 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 03 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 04 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 05 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 06 V8B urjaman@phenom' > .ssh/authorized_keys 07 user@i586con ~ $ cd .ssh 08 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 09 376 10 user@i586con / $ su -c poweroff 11 user@i586con / $ Stopping network: OK 12 Stopping klogd: OK 13 Stopping syslogd: OK 14 Seeding 256 bits and crediting 15 Saving 256 bits of creditable seed for next boot 16 umount: tmpfs busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: none busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 02-network-ssh === total time | wait time | event 4.4s | 4.4s | bootloader 54.7s | 50.1s | login prompt 67.8s | 12.7s | logged in 103.1s | 1.1s | ssh key entered 113.6s | 6.5s | sshd started 123.1s | 1.0s | ssh test complete 130.0s | | Shutdown === HTML: 02-network-ssh.html Formatting 'cursed.qcow', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=1073741824 lazy_refcounts=off refcount_bits=16 Event bootloader 4.321/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 51.968/200: 00 [ 6.035143] Freeing initrd memory: 4096K 01 [ 6.304933] Freeing initrd memory: 1852K 02 [ 7.661729] Freeing unused kernel image (initmem) memory: 312K 03 [ 7.673128] Write protecting kernel text and read-only data: 2880k 04 [ 7.675939] Run /init as init process 05 [ 8.398626] loop0: detected capacity change from 0 to 60760 06 [ 11.311372] zram: Added device: zram0 07 [ 11.973071] zram0: detected capacity change from 0 to 32768 08 Setting up swapspace version 1, size = 16773120 bytes 09 [ 12.138036] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 10 6380k SS 11 Saving 256 bits of non-creditable seed for next boot 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 3.853/20: 00 [ 6.304933] Freeing initrd memory: 1852K 01 [ 7.661729] Freeing unused kernel image (initmem) memory: 312K 02 [ 7.673128] Write protecting kernel text and read-only data: 2880k 03 [ 7.675939] Run /init as init process 04 [ 8.398626] loop0: detected capacity change from 0 to 60760 05 [ 11.311372] zram: Added device: zram0 06 [ 11.973071] zram0: detected capacity change from 0 to 32768 07 Setting up swapspace version 1, size = 16773120 bytes 08 [ 12.138036] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 09 6380k SS 10 Saving 256 bits of non-creditable seed for next boot 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Event fdisk complete 10.764/30.0: 00 01 i586con login: root 02 i586con ~ # printf 'n\n\n\n\n\nw\n' | fdisk /dev/sda 03 04 Welcome to fdisk (util-linux 2.38). 05 Changes will remain in memory only, until you decide to write them. 06 Be careful before using the write command. 07 08 Device does not contain a recognized partition table. 09 Created a new DOS disklabel with disk identifier 0x39c342bc. 10 11 Command (m for help): Partition type 12 p primary (0 primary, 0 extended, 4 free) 13 e extended (container for logical partitions) 14 Select (default p): 15 Using default response p. 16 Partition number (1-4, default 1): First sector (2048-2097151, default 2048): La 17 st sector, +/-sectors or +/-size{K,M,G,T,P} (2048-2097151, default 2097151): 18 Created a new partition 1 of type 'Linux' and of size 1023 MiB. 19 20 Command (m for help): The partition table has been altered. 21 Calling ioctl() to re-read partition table. 22 Syncing disks. 23 24 i586con ~ # Event install complete 206.889/300: 00 xt4 01 The filesystem needs a label. 02 Label [I586CON_BOOT]: Label chosen: I586CON_BOOT 03 The given disk partition will be ERASED, check that it is correct. 04 Type yes to continue: Continuing in 3 seconds 05 mke2fs 1.46.5 (30-Dec-2021) 06 Discarding device blocks: done 07 Creating filesystem with 261888 4k blocks and 65536 inodes 08 Filesystem UUID: 9d901292-9e5b-4961-ae05-b283828043f6 09 Superblock backups stored on blocks: 10 32768, 98304, 163840, 229376 11 12 Allocating group tables: done 13 Writing inode tables: done 14 Creating journal (4096 blocks): done 15 Writing superblocks and filesystem accounting information: done 16 17 Save complete - wrote rootfs.img and save.tgz 18 Installing for i386-pc platform. 19 grub-install: warning: cannot open directory `//share/locale': No such file or d 20 irectory. 21 Installation finished. No error reported. 22 Wrote grub.cfg 23 Installation complete, to new beginnings :) 24 Shutdown 17.583/80.0: 00 01 Save complete - wrote rootfs.img and save.tgz 02 Installing for i386-pc platform. 03 grub-install: warning: cannot open directory `//share/locale': No such file or d 04 irectory. 05 Installation finished. No error reported. 06 Wrote grub.cfg 07 Installation complete, to new beginnings :) 08 poweroff 09 i586con ~ # poweroff 10 i586con ~ # Stopping network: OK 11 Stopping klogd: OK 12 Stopping syslogd: OK 13 Seeding 256 bits without crediting 14 Saving 256 bits of creditable seed for next boot 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 umount: can't unmount /: Invalid argument 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 03-install-b2r-ext === total time | wait time | event 4.3s | 4.3s | bootloader 56.7s | 52.0s | login prompt 61.0s | 3.9s | logged in 74.9s | 10.8s | fdisk complete 285.9s | 206.9s | install complete 304.2s | | Shutdown === HTML: 03-install-b2r-ext.html Event GRUB 10.354/20: 00 01 GNU GRUB version 2.06 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 3s. 23 24 Event login prompt 49.963/200: 00 [ 13.829661] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 01 6380k SS 02 [ 15.058323] random: crng init done 03 [ 15.547241] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 04 (null). Quota mode: disabled. 05 Media found and mounted. 06 Unpacking save.tgz... 07 Setting up overlay... 08 [ 16.025199] loop0: detected capacity change from 0 to 61045 09 Switching to main /sbin/init 10 Seeding 256 bits without crediting 11 Saving 256 bits of creditable seed for next boot 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 3.106/40: 00 6380k SS 01 [ 15.058323] random: crng init done 02 [ 15.547241] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 03 (null). Quota mode: disabled. 04 Media found and mounted. 05 Unpacking save.tgz... 06 Setting up overlay... 07 [ 16.025199] loop0: detected capacity change from 0 to 61045 08 Switching to main /sbin/init 09 Seeding 256 bits without crediting 10 Saving 256 bits of creditable seed for next boot 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 10.281/80.0: 00 01 Login as root or user (no password). 02 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 03 04 Welcome! (/dev/tty1) 05 06 i586con login: root 07 i586con ~ # poweroff 08 i586con ~ # O0o.oops(): [daemon/check_kill.c(38)]: Could not open /var/run/gpm.p 09 id. 10 Stopping network: OK 11 Stopping klogd: OK 12 Stopping syslogd: OK 13 Seeding 256 bits and crediting 14 Saving 256 bits of creditable seed for next boot 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sda1 busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 04-hdboot-ext-cdl === total time | wait time | event 10.4s | 10.4s | GRUB 60.5s | 50.0s | login prompt 64.0s | 3.1s | logged in 75.0s | | Shutdown === HTML: 04-hdboot-ext-cdl.html Formatting 'cursed.qcow', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=419430400 lazy_refcounts=off refcount_bits=16 Event bootloader 4.293/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 46.150/200: 00 [ 12.989210] zram: Added device: zram0 01 [ 13.031186] zram0: detected capacity change from 0 to 32768 02 Setting up swapspace version 1, size = 16773120 bytes 03 [ 13.179016] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 04 6380k SS 05 Media found and mounted. 06 Unpacking save.tgz... 07 Setting up overlay... 08 [ 14.840852] loop0: detected capacity change from 0 to 61043 09 Switching to main /sbin/init 10 [ 16.032950] random: crng init done 11 Saving 256 bits of creditable seed for next boot 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 3.187/20: 00 [ 13.031186] zram0: detected capacity change from 0 to 32768 01 Setting up swapspace version 1, size = 16773120 bytes 02 [ 13.179016] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 03 6380k SS 04 Media found and mounted. 05 Unpacking save.tgz... 06 Setting up overlay... 07 [ 14.840852] loop0: detected capacity change from 0 to 61043 08 Switching to main /sbin/init 09 [ 16.032950] random: crng init done 10 Saving 256 bits of creditable seed for next boot 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Event fdisk complete 3.879/30.0: 00 01 i586con login: root 02 i586con ~ # printf 'n\n\n\n\n\nw\n' | fdisk /dev/sda 03 04 Welcome to fdisk (util-linux 2.38). 05 Changes will remain in memory only, until you decide to write them. 06 Be careful before using the write command. 07 08 Device does not contain a recognized partition table. 09 Created a new DOS disklabel with disk identifier 0x327d9d24. 10 11 Command (m for help): Partition type 12 p primary (0 primary, 0 extended, 4 free) 13 e extended (container for logical partitions) 14 Select (default p): 15 Using default response p. 16 Partition number (1-4, default 1): First sector (2048-819199, default 2048): Las 17 t sector, +/-sectors or +/-size{K,M,G,T,P} (2048-819199, default 819199): 18 Created a new partition 1 of type 'Linux' and of size 399 MiB. 19 20 Command (m for help): The partition table has been altered. 21 Calling ioctl() to re-read partition table. 22 Syncing disks. 23 24 i586con ~ # Event install complete 87.427/300: 00 Syncing disks. 01 02 i586con ~ # printf 'fat\n\nyes\n' | hdinstall /dev/sda1 /dev/sda 03 This is the device to be used: 04 Device /dev/sda1 is a 399.0 MiB partition 1 05 Disk Vendor/Type: ATA 06 Disk Model: QEMU HARDDISK 07 Disk Size: 0.391 GiB 08 Current filesystem (if any) cannot be used. 09 Choose the filesystem to format to (e[xt4]/[v]fat or quit): Filesystem chosen: v 10 fat 11 The filesystem needs a label. 12 Label [I586CONBT]: Label chosen: I586CONBT 13 The given disk partition will be ERASED, check that it is correct. 14 Type yes to continue: Continuing in 3 seconds 15 mkfs.fat 4.2 (2021-01-31) 16 487 blocks 17 Save complete - wrote rootfs.img and save.tgz 18 Installing for i386-pc platform. 19 grub-install: warning: cannot open directory `//share/locale': No such file or d 20 irectory. 21 Installation finished. No error reported. 22 Wrote grub.cfg 23 Installation complete, to new beginnings :) 24 Shutdown 6.803/80.0: 00 487 blocks 01 Save complete - wrote rootfs.img and save.tgz 02 Installing for i386-pc platform. 03 grub-install: warning: cannot open directory `//share/locale': No such file or d 04 irectory. 05 Installation finished. No error reported. 06 Wrote grub.cfg 07 Installation complete, to new beginnings :) 08 poweroff 09 i586con ~ # poweroff 10 i586con ~ # Stopping network: OK 11 Stopping klogd: OK 12 Stopping syslogd: OK 13 Seeding 256 bits and crediting 14 Saving 256 bits of creditable seed for next boot 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sr0 busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 05-install-cd-fat === total time | wait time | event 4.3s | 4.3s | bootloader 50.7s | 46.2s | login prompt 54.3s | 3.2s | logged in 61.3s | 3.9s | fdisk complete 152.8s | 87.4s | install complete 160.4s | | Shutdown === HTML: 05-install-cd-fat.html Event GRUB 11.302/20: 00 01 GNU GRUB version 2.06 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 2s. 23 24 Event login prompt 53.011/200: 00 [ 13.624603] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 01 6380k SS 02 [ 14.951371] random: crng init done 03 Media found and mounted. 04 Unpacking save.tgz... 05 Copying read-only image to RAM... 06 Setting up overlay... 07 [ 20.539605] loop0: detected capacity change from 0 to 60761 08 [ 20.547507] loop0: detected capacity change from 60761 to 60760 09 Switching to main /sbin/init 10 Seeding 256 bits and crediting 11 Saving 256 bits of creditable seed for next boot 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 3.181/40: 00 6380k SS 01 [ 14.951371] random: crng init done 02 Media found and mounted. 03 Unpacking save.tgz... 04 Copying read-only image to RAM... 05 Setting up overlay... 06 [ 20.539605] loop0: detected capacity change from 0 to 60761 07 [ 20.547507] loop0: detected capacity change from 60761 to 60760 08 Switching to main /sbin/init 09 Seeding 256 bits and crediting 10 Saving 256 bits of creditable seed for next boot 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 10.834/80.0: 00 01 Login as root or user (no password). 02 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 03 04 Welcome! (/dev/tty1) 05 06 i586con login: root 07 i586con ~ # poweroff 08 i586con ~ # O0o.oops(): [daemon/check_kill.c(38)]: Could not open /var/run/gpm.p 09 id. 10 Stopping network: OK 11 Stopping klogd: OK 12 Stopping syslogd: OK 13 Seeding 256 bits and crediting 14 Saving 256 bits of creditable seed for next boot 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: none busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 06-hdboot-fat === total time | wait time | event 11.3s | 11.3s | GRUB 64.4s | 53.0s | login prompt 68.0s | 3.2s | logged in 79.6s | | Shutdown === HTML: 06-hdboot-fat.html Event GRUB 9.170/20: 00 01 GNU GRUB version 2.06 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 4s. 23 24 Event login prompt 73.052/200: 00 [ 7.055506] Freeing unused kernel image (initmem) memory: 312K 01 [ 7.061511] Write protecting kernel text and read-only data: 2880k 02 [ 7.064720] Run /init as init process 03 [ 7.869376] loop0: detected capacity change from 0 to 60760 04 [ 11.057979] zram: Added device: zram0 05 [ 11.741843] zram0: detected capacity change from 0 to 32768 06 Setting up swapspace version 1, size = 16773120 bytes 07 [ 11.903832] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 08 6380k SS 09 Seeding 256 bits and crediting 10 [ 14.425367] random: crng init done 11 Saving 256 bits of creditable seed for next boot 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 3.407/40: 00 [ 7.061511] Write protecting kernel text and read-only data: 2880k 01 [ 7.064720] Run /init as init process 02 [ 7.869376] loop0: detected capacity change from 0 to 60760 03 [ 11.057979] zram: Added device: zram0 04 [ 11.741843] zram0: detected capacity change from 0 to 32768 05 Setting up swapspace version 1, size = 16773120 bytes 06 [ 11.903832] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 07 6380k SS 08 Seeding 256 bits and crediting 09 [ 14.425367] random: crng init done 10 Saving 256 bits of creditable seed for next boot 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 11.276/80.0: 00 01 Login as root or user (no password). 02 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 03 04 Welcome! (/dev/tty1) 05 06 i586con login: root 07 i586con ~ # poweroff 08 i586con ~ # O0o.oops(): [daemon/check_kill.c(38)]: Could not open /var/run/gpm.p 09 id. 10 Stopping network: OK 11 Stopping klogd: OK 12 Stopping syslogd: OK 13 Seeding 256 bits and crediting 14 Saving 256 bits of creditable seed for next boot 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 umount: can't unmount /: Invalid argument 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 07-hdboot-fat-b2r === total time | wait time | event 9.2s | 9.2s | GRUB 82.5s | 73.1s | login prompt 86.3s | 3.4s | logged in 98.3s | | Shutdown === HTML: 07-hdboot-fat-b2r.html