bootloader @ 14.6s
┌──────────────────────────────────────────────────────────┐
│ i586con, the tiny RAM-based linux │
├──────────────────────────────────────────────────────────┤
│ Linux to RAM, textmode │
│ Linux to RAM, VESA at 1024x768-16 │
│ Run from CD, textmode │
│ Run from CD, VESA at 1024x768-16 │
│ BIOS to RAM, textmode │
│ BIOS to RAM, VESA at 1024x768-16 │
│ GRUB2 (Memdisk floppy image) │
│ Poweroff │
│ List VESA Graphics Modes │
│ Memtest86+ │
│ │
│ │
└──────────────────────────────────────────────────────────┘
Press [Tab] to edit options
Automatic boot in 5 seconds...
<<FIRST<< | <PREV< | >NEXT> | >>LAST>>
login prompt timeout @ 215.3s
[ 19.028729] usb 1-1: Manufacturer: QEMU
[ 19.030033] usb 1-1: SerialNumber: 1-0000:00:01.2-1
[ 19.052763] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 19.076918] scsi host2: usb-storage 1-1:1.0
[ 20.165595] scsi 2:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ
: 0 ANSI: 5
[ 20.221750] sd 2:0:0:0: [sda] 90112 512-byte logical blocks: (46.1 MB/44.0 Mi
B)
[ 20.251574] sd 2:0:0:0: [sda] Write Protect is off
[ 20.274512] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 20.454524] sda: sda1
[ 20.561566] sd 2:0:0:0: [sda] Attached SCSI disk
Media found and mounted.
Unpacking save.tgz...
Setting up overlay...
[ 22.494214] loop0: detected capacity change from 0 to 73083
[ 22.504224] loop0: detected capacity change from 73083 to 73082
Switching to main /sbin/init
Saving 256 bits of creditable seed for next boot
Starting syslogd: OK
Starting klogd: OK
Launching net_daemon.sh
Populating /dev using udev: done
Starting network:
<<FIRST<< | <PREV< | >NEXT> | >>LAST>>=== SUMMARY for 01-lowram-usb ===
total time | wait time | event
14.6s | 14.6s | bootloader
215.3s | | login prompt - timeout