bootloader @ 4.3s
┌──────────────────────────────────────────────────────────┐
│ i586con, the tiny RAM-based linux │
├──────────────────────────────────────────────────────────┤
│ Linux to RAM, textmode │
│ Linux to RAM, VESA at 1024x768-16 │
│ Run from CD, textmode │
│ Run from CD, VESA at 1024x768-16 │
│ BIOS to RAM, textmode │
│ BIOS to RAM, VESA at 1024x768-16 │
│ GRUB2 (Memdisk floppy image) │
│ Poweroff │
│ List VESA Graphics Modes │
│ Memtest86+ │
│ │
│ │
└──────────────────────────────────────────────────────────┘
Press [Tab] to edit options
Automatic boot in 5 seconds...
<<FIRST<< | <PREV< | >NEXT> | >>LAST>>
login prompt timeout @ 204.6s
[ 17.516187] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 17.537103] scsi host2: usb-storage 1-1:1.0
[ 18.621894] scsi 2:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ
: 0 ANSI: 5
[ 18.666842] sd 2:0:0:0: [sda] 88064 512-byte logical blocks: (45.1 MB/43.0 Mi
B)
[ 18.697813] sd 2:0:0:0: [sda] Write Protect is off
[ 18.728829] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 18.891738] sda: sda1
[ 18.994891] sd 2:0:0:0: [sda] Attached SCSI disk
Media found and mounted.
Unpacking save.tgz...
Setting up overlay...
[ 20.809496] loop0: detected capacity change from 0 to 73035
[ 20.816152] loop0: detected capacity change from 73035 to 73034
Switching to main /sbin/init
Saving 256 bits of creditable seed for next boot
Starting syslogd: OK
Starting klogd: OK
Launching net_daemon.sh
Populating /dev using udev: done
Starting network: OK
Starting gpm (eventually, maybe)
<<FIRST<< | <PREV< | >NEXT> | >>LAST>>=== SUMMARY for 01-lowram-usb ===
total time | wait time | event
4.3s | 4.3s | bootloader
204.6s | | login prompt - timeout