Test results will be written into 'releases/testresults/2024.02.5-2024-09-05-c8e5f9e3' Event bootloader 9.512/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 login prompt Timeout 200: 00 [ 19.143917] usb 1-1: SerialNumber: 1-0000:00:01.2-1 01 [ 19.165169] usb-storage 1-1:1.0: USB Mass Storage device detected 02 [ 19.186236] scsi host2: usb-storage 1-1:1.0 03 [ 20.298883] scsi 2:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ 04 : 0 ANSI: 5 05 [ 20.343731] sd 2:0:0:0: [sda] 88064 512-byte logical blocks: (45.1 MB/43.0 Mi 06 B) 07 [ 20.372772] sd 2:0:0:0: [sda] Write Protect is off 08 [ 20.401757] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does 09 n't support DPO or FUA 10 [ 20.595718] sda: sda1 11 [ 20.697698] sd 2:0:0:0: [sda] Attached SCSI disk 12 Media found and mounted. 13 Unpacking save.tgz... 14 Setting up overlay... 15 [ 22.579343] loop0: detected capacity change from 0 to 73043 16 [ 22.586538] loop0: detected capacity change from 73043 to 73042 17 Switching to main /sbin/init 18 Saving 256 bits of creditable seed for next boot 19 Starting syslogd: OK 20 Starting klogd: OK 21 Launching net_daemon.sh 22 Populating /dev using udev: done 23 Starting network: OK 24 === SUMMARY for 01-lowram-usb === total time | wait time | event 9.5s | 9.5s | bootloader 210.6s | | login prompt - timeout === HTML: 01-lowram-usb.html