Test results will be written into 'releases/testresults/2025.02.10-2026-02-12-e011c3f6' Event bootloader 4.405/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options. [F1] for help. 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 186.008/300: 00 [ 21.185630] sd 2:0:0:0: [sda] 75776 512-byte logical blocks: (38.8 MB/37.0 Mi 01 B) 02 [ 21.202626] sd 2:0:0:0: [sda] Write Protect is off 03 [ 21.235540] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, supp 04 orts DPO and FUA 05 [ 21.416550] sda: sda1 06 [ 21.495785] sd 2:0:0:0: [sda] Attached SCSI disk 07 Media found and mounted. 08 Unpacking save.tgz... 09 Setting up overlay... 10 [ 23.555221] loop0: detected capacity change from 0 to 61023 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 1.839/40: 00 B) 01 [ 21.202626] sd 2:0:0:0: [sda] Write Protect is off 02 [ 21.235540] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, supp 03 orts DPO and FUA 04 [ 21.416550] sda: sda1 05 [ 21.495785] sd 2:0:0:0: [sda] Attached SCSI disk 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 23.555221] loop0: detected capacity change from 0 to 61023 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 40.335/80.0: 00 Starting gpm (eventually, maybe) 01 02 Login as root or user (no password). 03 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 04 05 Welcome! (/dev/tty1) 06 07 i586con login: root 08 i586con ~ # poweroff 09 i586con ~ # Stopping network: OK 10 Stopping klogd: stopped /sbin/klogd (pid 352) 11 OK 12 Stopping syslogd: stopped /sbin/syslogd (pid 348) 13 OK 14 umount: tmpfs busy - remounted read-only 15 umount: overlay busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: /dev/sda busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 The system is going down NOW! 20 Sent SIGTERM to all processes 21 Sent SIGKILL to all processes 22 Requesting system poweroff 23 [ 209.987844] reboot: Power down 24 === SUMMARY for 01-lowram-usb === total time | wait time | event 4.4s | 4.4s | bootloader 190.7s | 186.0s | login prompt 192.9s | 1.8s | logged in 234.0s | | Shutdown === HTML: 01-lowram-usb.html Event bootloader 4.122/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options. [F1] for help. 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 64.718/300: 00 [ 17.054879] random: crng init done 01 [ 17.350661] zram: Added device: zram0 02 [ 17.411618] zram0: detected capacity change from 0 to 32768 03 Setting up swapspace version 1, size = 16773120 bytes 04 [ 17.688529] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 05 6380k SS 06 Media found and mounted. 07 Unpacking save.tgz... 08 Copying read-only image to RAM... 09 Setting up overlay... 10 [ 24.450542] loop0: detected capacity change from 0 to 60736 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 19.931/60: 00 [ 17.350661] zram: Added device: zram0 01 [ 17.411618] zram0: detected capacity change from 0 to 32768 02 Setting up swapspace version 1, size = 16773120 bytes 03 [ 17.688529] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 04 6380k SS 05 Media found and mounted. 06 Unpacking save.tgz... 07 Copying read-only image to RAM... 08 Setting up overlay... 09 [ 24.450542] loop0: detected capacity change from 0 to 60736 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: user 24 user@i586con ~ $ Event ssh key entered 1.077/60: 00 Setting up overlay... 01 [ 24.450542] loop0: detected capacity change from 0 to 60736 02 Switching to main /sbin/init 03 Starting syslogd: OK 04 Starting klogd: OK 05 Launching net_daemon.sh 06 Populating /dev using udev: done 07 Starting network: OK 08 Starting gpm (eventually, maybe) 09 10 Login as root or user (no password). 11 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 12 13 Welcome! (/dev/tty1) 14 15 i586con login: user 16 user@i586con ~ $ mkdir -p .ssh 17 echo 'ssh-rsauser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo 18 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 19 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 20 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 21 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 22 V8B urjaman@phenom' > .ssh/authorized_keys 23 user@i586con ~ $ cd .ssh 24 user@i586con ~/.ssh $ Event sshd started 6.652/600: 00 Switching to main /sbin/init 01 Starting syslogd: OK 02 Starting klogd: OK 03 Launching net_daemon.sh 04 Populating /dev using udev: done 05 Starting network: OK 06 Starting gpm (eventually, maybe) 07 08 Login as root or user (no password). 09 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 10 11 Welcome! (/dev/tty1) 12 13 i586con login: user 14 user@i586con ~ $ mkdir -p .ssh 15 echo 'ssh-rsauser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo 16 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 17 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 18 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 19 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 20 V8B urjaman@phenom' > .ssh/authorized_keys 21 user@i586con ~ $ cd .ssh 22 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 23 393 24 user@i586con / $ Warning: Permanently added '[127.0.0.1]:1586' (ED25519) to the list of known hosts. Event ssh test complete 1.015/30.0: 00 Switching to main /sbin/init 01 Starting syslogd: OK 02 Starting klogd: OK 03 Launching net_daemon.sh 04 Populating /dev using udev: done 05 Starting network: OK 06 Starting gpm (eventually, maybe) 07 08 Login as root or user (no password). 09 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 10 11 Welcome! (/dev/tty1) 12 13 i586con login: user 14 user@i586con ~ $ mkdir -p .ssh 15 echo 'ssh-rsauser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo 16 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 17 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 18 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 19 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 20 V8B urjaman@phenom' > .ssh/authorized_keys 21 user@i586con ~ $ cd .ssh 22 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 23 393 24 user@i586con / $ Shutdown 7.962/80.0: 00 echo 'ssh-rsauser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo 01 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 02 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 03 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 04 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 05 V8B urjaman@phenom' > .ssh/authorized_keys 06 user@i586con ~ $ cd .ssh 07 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 08 393 09 user@i586con / $ su -c poweroff 10 user@i586con / $ Stopping network: OK 11 Stopping klogd: stopped /sbin/klogd (pid 307) 12 OK 13 Stopping syslogd: stopped /sbin/syslogd (pid 303) 14 OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: none busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 The system is going down NOW! 20 Sent SIGTERM to all processes 21 Sent SIGKILL to all processes 22 Requesting system poweroff 23 [ 139.629912] reboot: Power down 24 === SUMMARY for 02-network-ssh === total time | wait time | event 4.1s | 4.1s | bootloader 68.9s | 64.7s | login prompt 89.3s | 19.9s | logged in 124.7s | 1.1s | ssh key entered 135.3s | 6.7s | sshd started 143.2s | 1.0s | ssh test complete 152.4s | | Shutdown === HTML: 02-network-ssh.html Formatting 'cursed.qcow', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=1073741824 lazy_refcounts=off refcount_bits=16 Event bootloader 4.094/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options. [F1] for help. 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 61.117/300: 00 [ 6.227536] Freeing initrd memory: 4096K 01 [ 6.425526] Freeing initrd memory: 4096K 02 [ 6.786484] Freeing initrd memory: 1844K 03 [ 6.886455] Freeing unused kernel image (initmem) memory: 320K 04 [ 6.897779] Write protecting kernel text and read-only data: 2932k 05 [ 6.902489] Run /init as init process 06 [ 8.153579] loop0: detected capacity change from 0 to 60736 07 [ 12.002782] zram: Added device: zram0 08 [ 13.131611] zram0: detected capacity change from 0 to 32768 09 Setting up swapspace version 1, size = 16773120 bytes 10 [ 13.400649] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 11 6380k SS 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 4.332/20: 00 [ 6.425526] Freeing initrd memory: 4096K 01 [ 6.786484] Freeing initrd memory: 1844K 02 [ 6.886455] Freeing unused kernel image (initmem) memory: 320K 03 [ 6.897779] Write protecting kernel text and read-only data: 2932k 04 [ 6.902489] Run /init as init process 05 [ 8.153579] loop0: detected capacity change from 0 to 60736 06 [ 12.002782] zram: Added device: zram0 07 [ 13.131611] zram0: detected capacity change from 0 to 32768 08 Setting up swapspace version 1, size = 16773120 bytes 09 [ 13.400649] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 10 6380k SS 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Event fdisk complete 14.504/30.0: 00 01 i586con login: root 02 i586con ~ # printf 'n\n\n\n\n\nw\n' | fdisk /dev/sda 03 04 Welcome to fdisk (util-linux 2.40.2). 05 Changes will remain in memory only, until you decide to write them. 06 Be careful before using the write command. 07 08 Device does not contain a recognized partition table. 09 Created a new DOS (MBR) disklabel with disk identifier 0x168bb8c8. 10 11 Command (m for help): Partition type 12 p primary (0 primary, 0 extended, 4 free) 13 e extended (container for logical partitions) 14 Select (default p): 15 Using default response p. 16 Partition number (1-4, default 1): First sector (2048-2097151, default 2048): La 17 st sector, +/-sectors or +/-size{K,M,G,T,P} (2048-2097151, default 2097151): 18 Created a new partition 1 of type 'Linux' and of size 1023 MiB. 19 20 Command (m for help): The partition table has been altered. 21 Calling ioctl() to re-read partition table. 22 Syncing disks. 23 24 i586con ~ # Event install complete 114.758/600: 00 xt4 01 The filesystem needs a label. 02 Label [I586CON_BOOT]: Label chosen: I586CON_BOOT 03 The given disk partition will be ERASED, check that it is correct. 04 Type yes to continue: Continuing in 3 seconds 05 mke2fs 1.47.2 (1-Jan-2025) 06 Discarding device blocks: done 07 Creating filesystem with 261888 4k blocks and 65536 inodes 08 Filesystem UUID: f4fe1301-1dfc-488a-997d-53cf1046af32 09 Superblock backups stored on blocks: 10 32768, 98304, 163840, 229376 11 12 Allocating group tables: done 13 Writing inode tables: done 14 Creating journal (4096 blocks): done 15 Writing superblocks and filesystem accounting information: done 16 17 Save complete - wrote rootfs.img and save.tgz 18 Installing for i386-pc platform. 19 grub-install: warning: cannot open directory `//share/locale': No such file or d 20 irectory. 21 Installation finished. No error reported. 22 Wrote grub.cfg 23 Installation complete, to new beginnings :) 24 Shutdown 9.903/80.0: 00 01 Save complete - wrote rootfs.img and save.tgz 02 Installing for i386-pc platform. 03 grub-install: warning: cannot open directory `//share/locale': No such file or d 04 irectory. 05 Installation finished. No error reported. 06 Wrote grub.cfg 07 Installation complete, to new beginnings :) 08 poweroff 09 i586con ~ # poweroff 10 i586con ~ # Stopping network: OK 11 Stopping klogd: stopped /sbin/klogd (pid 59) 12 OK 13 Stopping syslogd: stopped /sbin/syslogd (pid 55) 14 OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 umount: can't unmount /: Invalid argument 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 03-install-b2r-ext === total time | wait time | event 4.1s | 4.1s | bootloader 65.6s | 61.1s | login prompt 70.4s | 4.3s | logged in 88.0s | 14.5s | fdisk complete 206.9s | 114.8s | install complete 217.5s | | Shutdown === HTML: 03-install-b2r-ext.html Event GRUB 8.229/20: 00 01 GNU GRUB version 2.12 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 4s. 23 24 Event login prompt 66.268/300: 00 [ 17.962566] zram0: detected capacity change from 0 to 32768 01 Setting up swapspace version 1, size = 16773120 bytes 02 [ 18.191476] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 03 6380k SS 04 [ 20.747091] EXT4-fs (sda1): orphan cleanup on readonly fs 05 [ 20.759095] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 06 (null). Quota mode: disabled. 07 Media found and mounted. 08 Unpacking save.tgz... 09 Setting up overlay... 10 [ 21.393108] loop0: detected capacity change from 0 to 61025 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 4.807/40: 00 Setting up swapspace version 1, size = 16773120 bytes 01 [ 18.191476] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 02 6380k SS 03 [ 20.747091] EXT4-fs (sda1): orphan cleanup on readonly fs 04 [ 20.759095] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 05 (null). Quota mode: disabled. 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 21.393108] loop0: detected capacity change from 0 to 61025 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 14.711/80.0: 00 Starting network: OK 01 Starting gpm (eventually, maybe) 02 03 Login as root or user (no password). 04 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 05 06 Welcome! (/dev/tty1) 07 08 i586con login: root 09 i586con ~ # poweroff 10 i586con ~ # Stopping network: OK 11 Stopping klogd: stopped /sbin/klogd (pid 312) 12 OK 13 Stopping syslogd: stopped /sbin/syslogd (pid 308) 14 OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sda1 busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 04-hdboot-ext-cdl === total time | wait time | event 8.2s | 8.2s | GRUB 74.7s | 66.3s | login prompt 79.9s | 4.8s | logged in 95.3s | | Shutdown === HTML: 04-hdboot-ext-cdl.html Formatting 'cursed.qcow', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=419430400 lazy_refcounts=off refcount_bits=16 Event bootloader 4.033/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options. [F1] for help. 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 61.394/300: 00 [ 9.927397] sd 0:0:0:0: [sda] Attached SCSI disk 01 [ 17.056223] random: crng init done 02 [ 17.627127] zram: Added device: zram0 03 [ 17.694034] zram0: detected capacity change from 0 to 32768 04 Setting up swapspace version 1, size = 16773120 bytes 05 [ 17.921962] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 06 6380k SS 07 Media found and mounted. 08 Unpacking save.tgz... 09 Setting up overlay... 10 [ 20.163611] loop0: detected capacity change from 0 to 61023 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 4.548/20: 00 [ 17.056223] random: crng init done 01 [ 17.627127] zram: Added device: zram0 02 [ 17.694034] zram0: detected capacity change from 0 to 32768 03 Setting up swapspace version 1, size = 16773120 bytes 04 [ 17.921962] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 05 6380k SS 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 20.163611] loop0: detected capacity change from 0 to 61023 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Event fdisk complete 9.233/30.0: 00 01 i586con login: root 02 i586con ~ # printf 'n\n\n\n\n\nw\n' | fdisk /dev/sda 03 04 Welcome to fdisk (util-linux 2.40.2). 05 Changes will remain in memory only, until you decide to write them. 06 Be careful before using the write command. 07 08 Device does not contain a recognized partition table. 09 Created a new DOS (MBR) disklabel with disk identifier 0x30e8b696. 10 11 Command (m for help): Partition type 12 p primary (0 primary, 0 extended, 4 free) 13 e extended (container for logical partitions) 14 Select (default p): 15 Using default response p. 16 Partition number (1-4, default 1): First sector (2048-819199, default 2048): Las 17 t sector, +/-sectors or +/-size{K,M,G,T,P} (2048-819199, default 819199): 18 Created a new partition 1 of type 'Linux' and of size 399 MiB. 19 20 Command (m for help): The partition table has been altered. 21 Calling ioctl() to re-read partition table. 22 Syncing disks. 23 24 i586con ~ # Event install complete 94.203/600: 00 Syncing disks. 01 02 i586con ~ # printf 'fat\n\nyes\n' | hdinstall /dev/sda1 /dev/sda 03 This is the device to be used: 04 Device /dev/sda1 is a 399.0 MiB partition 1 05 Disk Vendor/Type: ATA 06 Disk Model: QEMU HARDDISK 07 Disk Size: 0.391 GiB 08 Current filesystem (if any) cannot be used. 09 Choose the filesystem to format to (e[xt4]/[v]fat or quit): Filesystem chosen: v 10 fat 11 The filesystem needs a label. 12 Label [I586CONBT]: Label chosen: I586CONBT 13 The given disk partition will be ERASED, check that it is correct. 14 Type yes to continue: Continuing in 3 seconds 15 mkfs.fat 4.2 (2021-01-31) 16 495 blocks 17 Save complete - wrote rootfs.img and save.tgz 18 Installing for i386-pc platform. 19 grub-install: warning: cannot open directory `//share/locale': No such file or d 20 irectory. 21 Installation finished. No error reported. 22 Wrote grub.cfg 23 Installation complete, to new beginnings :) 24 Shutdown 8.860/80.0: 00 Save complete - wrote rootfs.img and save.tgz 01 Installing for i386-pc platform. 02 grub-install: warning: cannot open directory `//share/locale': No such file or d 03 irectory. 04 Installation finished. No error reported. 05 Wrote grub.cfg 06 Installation complete, to new beginnings :) 07 poweroff 08 i586con ~ # poweroff 09 i586con ~ # Stopping network: OK 10 Stopping klogd: stopped /sbin/klogd (pid 302) 11 OK 12 Stopping syslogd: stopped /sbin/syslogd (pid 298) 13 OK 14 umount: tmpfs busy - remounted read-only 15 umount: overlay busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: /dev/sr0 busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 The system is going down NOW! 20 Sent SIGTERM to all processes 21 Sent SIGKILL to all processes 22 Requesting system poweroff 23 [ 175.848886] reboot: Power down 24 === SUMMARY for 05-install-cd-fat === total time | wait time | event 4.0s | 4.0s | bootloader 65.7s | 61.4s | login prompt 70.6s | 4.5s | logged in 83.0s | 9.2s | fdisk complete 181.3s | 94.2s | install complete 190.9s | | Shutdown === HTML: 05-install-cd-fat.html Event GRUB 7.586/20: 00 01 GNU GRUB version 2.12 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 5s. 23 24 Event login prompt 71.262/300: 00 [ 17.060144] random: crng init done 01 [ 17.939989] zram: Added device: zram0 02 [ 18.003036] zram0: detected capacity change from 0 to 32768 03 Setting up swapspace version 1, size = 16773120 bytes 04 [ 18.229740] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 05 6380k SS 06 Media found and mounted. 07 Unpacking save.tgz... 08 Copying read-only image to RAM... 09 Setting up overlay... 10 [ 26.128553] loop0: detected capacity change from 0 to 60736 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 4.714/40: 00 [ 17.939989] zram: Added device: zram0 01 [ 18.003036] zram0: detected capacity change from 0 to 32768 02 Setting up swapspace version 1, size = 16773120 bytes 03 [ 18.229740] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 04 6380k SS 05 Media found and mounted. 06 Unpacking save.tgz... 07 Copying read-only image to RAM... 08 Setting up overlay... 09 [ 26.128553] loop0: detected capacity change from 0 to 60736 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 14.744/80.0: 00 Starting network: OK 01 Starting gpm (eventually, maybe) 02 03 Login as root or user (no password). 04 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 05 06 Welcome! (/dev/tty1) 07 08 i586con login: root 09 i586con ~ # poweroff 10 i586con ~ # Stopping network: OK 11 Stopping klogd: stopped /sbin/klogd (pid 310) 12 OK 13 Stopping syslogd: stopped /sbin/syslogd (pid 306) 14 OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: none busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 06-hdboot-fat === total time | wait time | event 7.6s | 7.6s | GRUB 79.0s | 71.3s | login prompt 84.1s | 4.7s | logged in 99.5s | | Shutdown === HTML: 06-hdboot-fat.html Event GRUB 9.106/20: 00 01 GNU GRUB version 2.12 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 3s. 23 24 Event login prompt 84.442/300: 00 [ 5.963410] Freeing initrd memory: 4096K 01 [ 6.157386] Freeing initrd memory: 4096K 02 [ 6.539354] Freeing initrd memory: 1844K 03 [ 6.637308] Freeing unused kernel image (initmem) memory: 320K 04 [ 6.648224] Write protecting kernel text and read-only data: 2932k 05 [ 6.652324] Run /init as init process 06 [ 7.924209] loop0: detected capacity change from 0 to 60736 07 [ 11.717656] zram: Added device: zram0 08 [ 12.827449] zram0: detected capacity change from 0 to 32768 09 Setting up swapspace version 1, size = 16773120 bytes 10 [ 13.072374] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 11 6380k SS 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 4.629/40: 00 [ 6.157386] Freeing initrd memory: 4096K 01 [ 6.539354] Freeing initrd memory: 1844K 02 [ 6.637308] Freeing unused kernel image (initmem) memory: 320K 03 [ 6.648224] Write protecting kernel text and read-only data: 2932k 04 [ 6.652324] Run /init as init process 05 [ 7.924209] loop0: detected capacity change from 0 to 60736 06 [ 11.717656] zram: Added device: zram0 07 [ 12.827449] zram0: detected capacity change from 0 to 32768 08 Setting up swapspace version 1, size = 16773120 bytes 09 [ 13.072374] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 10 6380k SS 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 17.097/80.0: 00 Starting network: OK 01 Starting gpm (eventually, maybe) 02 03 Login as root or user (no password). 04 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 05 06 Welcome! (/dev/tty1) 07 08 i586con login: root 09 i586con ~ # poweroff 10 i586con ~ # Stopping network: OK 11 Stopping klogd: stopped /sbin/klogd (pid 59) 12 OK 13 Stopping syslogd: stopped /sbin/syslogd (pid 55) 14 OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 umount: can't unmount /: Invalid argument 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 07-hdboot-fat-b2r === total time | wait time | event 9.1s | 9.1s | GRUB 93.8s | 84.4s | login prompt 98.8s | 4.6s | logged in 116.7s | | Shutdown === HTML: 07-hdboot-fat-b2r.html