Test results will be written into 'releases/testresults/2025.02.5-2025-08-14-8b2dde5f' Event bootloader 9.971/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options. [F1] for help. 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 214.220/300: 00 [ 26.074974] sd 2:0:0:0: [sda] 75776 512-byte logical blocks: (38.8 MB/37.0 Mi 01 B) 02 [ 26.086974] sd 2:0:0:0: [sda] Write Protect is off 03 [ 26.103912] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does 04 n't support DPO or FUA 05 [ 26.335898] sda: sda1 06 [ 26.419922] sd 2:0:0:0: [sda] Attached SCSI disk 07 Media found and mounted. 08 Unpacking save.tgz... 09 Setting up overlay... 10 [ 29.712474] loop0: detected capacity change from 0 to 60951 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 1.896/40: 00 B) 01 [ 26.086974] sd 2:0:0:0: [sda] Write Protect is off 02 [ 26.103912] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does 03 n't support DPO or FUA 04 [ 26.335898] sda: sda1 05 [ 26.419922] sd 2:0:0:0: [sda] Attached SCSI disk 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 29.712474] loop0: detected capacity change from 0 to 60951 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 48.384/80.0: 00 Populating /dev using udev: done 01 Starting network: OK 02 Starting gpm (eventually, maybe) 03 04 Login as root or user (no password). 05 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 06 07 Welcome! (/dev/tty1) 08 09 i586con login: root 10 i586con ~ # poweroff 11 i586con ~ # Stopping network: OK 12 Stopping klogd: OK 13 Stopping syslogd: stopped /sbin/syslogd (pid 348) 14 OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sda busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 01-lowram-usb === total time | wait time | event 10.0s | 10.0s | bootloader 224.5s | 214.2s | login prompt 226.8s | 1.9s | logged in 275.9s | | Shutdown === HTML: 01-lowram-usb.html Event bootloader 5.085/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options. [F1] for help. 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 71.966/300: 00 [ 17.058794] random: crng init done 01 [ 20.217191] zram: Added device: zram0 02 [ 20.281145] zram0: detected capacity change from 0 to 32768 03 Setting up swapspace version 1, size = 16773120 bytes 04 [ 20.578021] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 05 6380k SS 06 Media found and mounted. 07 Unpacking save.tgz... 08 Copying read-only image to RAM... 09 Setting up overlay... 10 [ 29.706715] loop0: detected capacity change from 0 to 60664 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 19.540/60: 00 [ 20.217191] zram: Added device: zram0 01 [ 20.281145] zram0: detected capacity change from 0 to 32768 02 Setting up swapspace version 1, size = 16773120 bytes 03 [ 20.578021] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 04 6380k SS 05 Media found and mounted. 06 Unpacking save.tgz... 07 Copying read-only image to RAM... 08 Setting up overlay... 09 [ 29.706715] loop0: detected capacity change from 0 to 60664 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: user 24 user@i586con ~ $ Event ssh key entered 1.061/60: 00 Setting up overlay... 01 [ 29.706715] loop0: detected capacity change from 0 to 60664 02 Switching to main /sbin/init 03 Starting syslogd: OK 04 Starting klogd: OK 05 Launching net_daemon.sh 06 Populating /dev using udev: done 07 Starting network: OK 08 Starting gpm (eventually, maybe) 09 10 Login as root or user (no password). 11 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 12 13 Welcome! (/dev/tty1) 14 15 i586con login: user 16 user@i586con ~ $ mkdir -p .ssh 17 echo 'ssh-ruser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55 18 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 19 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 20 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 21 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 22 V8B urjaman@phenom' > .ssh/authorized_keys 23 cuser@i586con ~ $ cd .ssh 24 user@i586con ~/.ssh $ Event sshd started 6.647/600: 00 Switching to main /sbin/init 01 Starting syslogd: OK 02 Starting klogd: OK 03 Launching net_daemon.sh 04 Populating /dev using udev: done 05 Starting network: OK 06 Starting gpm (eventually, maybe) 07 08 Login as root or user (no password). 09 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 10 11 Welcome! (/dev/tty1) 12 13 i586con login: user 14 user@i586con ~ $ mkdir -p .ssh 15 echo 'ssh-ruser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55 16 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 17 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 18 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 19 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 20 V8B urjaman@phenom' > .ssh/authorized_keys 21 cuser@i586con ~ $ cd .ssh 22 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 23 394 24 user@i586con / $ Warning: Permanently added '[127.0.0.1]:1586' (ED25519) to the list of known hosts. Event ssh test complete 1.008/30.0: 00 Switching to main /sbin/init 01 Starting syslogd: OK 02 Starting klogd: OK 03 Launching net_daemon.sh 04 Populating /dev using udev: done 05 Starting network: OK 06 Starting gpm (eventually, maybe) 07 08 Login as root or user (no password). 09 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 10 11 Welcome! (/dev/tty1) 12 13 i586con login: user 14 user@i586con ~ $ mkdir -p .ssh 15 echo 'ssh-ruser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55 16 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 17 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 18 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 19 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 20 V8B urjaman@phenom' > .ssh/authorized_keys 21 cuser@i586con ~ $ cd .ssh 22 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 23 394 24 user@i586con / $ Shutdown 6.897/80.0: 00 i586con login: user 01 user@i586con ~ $ mkdir -p .ssh 02 echo 'ssh-ruser@i586con ~ $ echo 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC5sdPo55 03 jClFxjTubRyOTlBE5qKRWfsSh9hIvana3CpPb6mzPRqi6fCo8vvupMY4l8k5eFrSQl4VL92iYRTKDqVL 04 THfbFizDKVrHob/OpGR26lQo/96dikVMucZmth5o2xttO2Rg7SlnatihBgpleMhLFbEq9J9QkZHDmmZZ 05 r+NxYL3J9BRHckcZncNTGsVDXE+wQ5ji/oPrNkNJ/dXuj/C5v8GqpbnjKpR2xxK88hDNZG/kv5k8ze+1 06 5JlukVR0EjJLQTpldbrK1KLcWOz623o8nMf+mGiTCZtv3rZRfkKMmCYZFDRC2FhgazVN1qBfGDkLZj9Z 07 V8B urjaman@phenom' > .ssh/authorized_keys 08 cuser@i586con ~ $ cd .ssh 09 user@i586con ~/.ssh $ while ! pidof sshd; do sleep 1; done; sleep 5; cd / 10 394 11 user@i586con / $ su -c poweroff 12 user@i586con / $ Stopping network: OK 13 Stopping klogd: OK 14 Stopping syslogd: stopped /sbin/syslogd (pid 303) 15 OK 16 umount: tmpfs busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: none busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 02-network-ssh === total time | wait time | event 5.1s | 5.1s | bootloader 77.2s | 72.0s | login prompt 97.1s | 19.5s | logged in 132.5s | 1.1s | ssh key entered 143.2s | 6.6s | sshd started 151.0s | 1.0s | ssh test complete 159.1s | | Shutdown === HTML: 02-network-ssh.html Formatting 'cursed.qcow', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=1073741824 lazy_refcounts=off refcount_bits=16 Event bootloader 4.902/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options. [F1] for help. 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 65.708/300: 00 [ 7.007761] Freeing initrd memory: 4096K 01 [ 7.421709] Freeing initrd memory: 1808K 02 [ 9.542375] Freeing unused kernel image (initmem) memory: 320K 03 [ 9.551696] Write protecting kernel text and read-only data: 2924k 04 [ 9.556432] Run /init as init process 05 [ 10.837242] loop0: detected capacity change from 0 to 60664 06 [ 14.946619] zram: Added device: zram0 07 [ 16.185495] zram0: detected capacity change from 0 to 32768 08 Setting up swapspace version 1, size = 16773120 bytes 09 [ 16.465349] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 10 6380k SS 11 [ 17.062317] random: crng init done 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 5.107/20: 00 [ 7.421709] Freeing initrd memory: 1808K 01 [ 9.542375] Freeing unused kernel image (initmem) memory: 320K 02 [ 9.551696] Write protecting kernel text and read-only data: 2924k 03 [ 9.556432] Run /init as init process 04 [ 10.837242] loop0: detected capacity change from 0 to 60664 05 [ 14.946619] zram: Added device: zram0 06 [ 16.185495] zram0: detected capacity change from 0 to 32768 07 Setting up swapspace version 1, size = 16773120 bytes 08 [ 16.465349] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 09 6380k SS 10 [ 17.062317] random: crng init done 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Event fdisk complete 16.591/30.0: 00 01 i586con login: root 02 i586con ~ # printf 'n\n\n\n\n\nw\n' | fdisk /dev/sda 03 04 Welcome to fdisk (util-linux 2.40.2). 05 Changes will remain in memory only, until you decide to write them. 06 Be careful before using the write command. 07 08 Device does not contain a recognized partition table. 09 Created a new DOS (MBR) disklabel with disk identifier 0x5d5074b6. 10 11 Command (m for help): Partition type 12 p primary (0 primary, 0 extended, 4 free) 13 e extended (container for logical partitions) 14 Select (default p): 15 Using default response p. 16 Partition number (1-4, default 1): First sector (2048-2097151, default 2048): La 17 st sector, +/-sectors or +/-size{K,M,G,T,P} (2048-2097151, default 2097151): 18 Created a new partition 1 of type 'Linux' and of size 1023 MiB. 19 20 Command (m for help): The partition table has been altered. 21 Calling ioctl() to re-read partition table. 22 Syncing disks. 23 24 i586con ~ # Event install complete 112.153/600: 00 xt4 01 The filesystem needs a label. 02 Label [I586CON_BOOT]: Label chosen: I586CON_BOOT 03 The given disk partition will be ERASED, check that it is correct. 04 Type yes to continue: Continuing in 3 seconds 05 mke2fs 1.47.2 (1-Jan-2025) 06 Discarding device blocks: done 07 Creating filesystem with 261888 4k blocks and 65536 inodes 08 Filesystem UUID: a5dd219c-498e-4db0-ac6b-7e6bafd524f8 09 Superblock backups stored on blocks: 10 32768, 98304, 163840, 229376 11 12 Allocating group tables: done 13 Writing inode tables: done 14 Creating journal (4096 blocks): done 15 Writing superblocks and filesystem accounting information: done 16 17 Save complete - wrote rootfs.img and save.tgz 18 Installing for i386-pc platform. 19 grub-install: warning: cannot open directory `//share/locale': No such file or d 20 irectory. 21 Installation finished. No error reported. 22 Wrote grub.cfg 23 Installation complete, to new beginnings :) 24 Shutdown 13.076/80.0: 00 Writing superblocks and filesystem accounting information: done 01 02 Save complete - wrote rootfs.img and save.tgz 03 Installing for i386-pc platform. 04 grub-install: warning: cannot open directory `//share/locale': No such file or d 05 irectory. 06 Installation finished. No error reported. 07 Wrote grub.cfg 08 Installation complete, to new beginnings :) 09 poweroff 10 i586con ~ # poweroff 11 i586con ~ # Stopping network: OK 12 Stopping klogd: OK 13 Stopping syslogd: stopped /sbin/syslogd (pid 55) 14 OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 umount: can't unmount /: Invalid argument 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 03-install-b2r-ext === total time | wait time | event 4.9s | 4.9s | bootloader 71.0s | 65.7s | login prompt 76.6s | 5.1s | logged in 96.3s | 16.6s | fdisk complete 212.6s | 112.2s | install complete 226.4s | | Shutdown === HTML: 03-install-b2r-ext.html Event GRUB 10.155/20: 00 01 GNU GRUB version 2.12 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 4s. 23 24 Event login prompt 73.221/300: 00 [ 21.511334] zram0: detected capacity change from 0 to 32768 01 Setting up swapspace version 1, size = 16773120 bytes 02 [ 21.751461] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 03 6380k SS 04 [ 24.436818] EXT4-fs (sda1): orphan cleanup on readonly fs 05 [ 24.449868] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 06 (null). Quota mode: disabled. 07 Media found and mounted. 08 Unpacking save.tgz... 09 Setting up overlay... 10 [ 25.155799] loop0: detected capacity change from 0 to 60953 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 5.108/40: 00 Setting up swapspace version 1, size = 16773120 bytes 01 [ 21.751461] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 02 6380k SS 03 [ 24.436818] EXT4-fs (sda1): orphan cleanup on readonly fs 04 [ 24.449868] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 05 (null). Quota mode: disabled. 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 25.155799] loop0: detected capacity change from 0 to 60953 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 15.670/80.0: 00 Populating /dev using udev: done 01 Starting network: OK 02 Starting gpm (eventually, maybe) 03 04 Login as root or user (no password). 05 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 06 07 Welcome! (/dev/tty1) 08 09 i586con login: root 10 i586con ~ # poweroff 11 i586con ~ # Stopping network: OK 12 Stopping klogd: OK 13 Stopping syslogd: stopped /sbin/syslogd (pid 308) 14 OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sda1 busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 04-hdboot-ext-cdl === total time | wait time | event 10.2s | 10.2s | GRUB 83.6s | 73.2s | login prompt 89.1s | 5.1s | logged in 105.5s | | Shutdown === HTML: 04-hdboot-ext-cdl.html Formatting 'cursed.qcow', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=419430400 lazy_refcounts=off refcount_bits=16 Event bootloader 4.823/20: 00 ┌──────────────────────────────────────────────────────────┐ 01 │ i586con, the tiny RAM-based linux │ 02 ├──────────────────────────────────────────────────────────┤ 03 │ Linux to RAM, textmode │ 04 │ Linux to RAM, VESA at 1024x768-16 │ 05 │ Run from CD, textmode │ 06 │ Run from CD, VESA at 1024x768-16 │ 07 │ BIOS to RAM, textmode │ 08 │ BIOS to RAM, VESA at 1024x768-16 │ 09 │ GRUB2 (Memdisk floppy image) │ 10 │ Poweroff │ 11 │ List VESA Graphics Modes │ 12 │ Memtest86+ │ 13 │ │ 14 │ │ 15 └──────────────────────────────────────────────────────────┘ 16 17 Press [Tab] to edit options. [F1] for help. 18 19 Automatic boot in 5 seconds... 20 21 22 23 24 Event login prompt 66.727/300: 00 [ 11.996373] sd 0:0:0:0: [sda] Attached SCSI disk 01 [ 17.062783] random: crng init done 02 [ 20.147326] zram: Added device: zram0 03 [ 20.212057] zram0: detected capacity change from 0 to 32768 04 Setting up swapspace version 1, size = 16773120 bytes 05 [ 20.460085] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 06 6380k SS 07 Media found and mounted. 08 Unpacking save.tgz... 09 Setting up overlay... 10 [ 22.835655] loop0: detected capacity change from 0 to 60951 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 5.160/20: 00 [ 17.062783] random: crng init done 01 [ 20.147326] zram: Added device: zram0 02 [ 20.212057] zram0: detected capacity change from 0 to 32768 03 Setting up swapspace version 1, size = 16773120 bytes 04 [ 20.460085] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 05 6380k SS 06 Media found and mounted. 07 Unpacking save.tgz... 08 Setting up overlay... 09 [ 22.835655] loop0: detected capacity change from 0 to 60951 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Event fdisk complete 10.991/30.0: 00 01 i586con login: root 02 i586con ~ # printf 'n\n\n\n\n\nw\n' | fdisk /dev/sda 03 04 Welcome to fdisk (util-linux 2.40.2). 05 Changes will remain in memory only, until you decide to write them. 06 Be careful before using the write command. 07 08 Device does not contain a recognized partition table. 09 Created a new DOS (MBR) disklabel with disk identifier 0x4d4c14f2. 10 11 Command (m for help): Partition type 12 p primary (0 primary, 0 extended, 4 free) 13 e extended (container for logical partitions) 14 Select (default p): 15 Using default response p. 16 Partition number (1-4, default 1): First sector (2048-819199, default 2048): Las 17 t sector, +/-sectors or +/-size{K,M,G,T,P} (2048-819199, default 819199): 18 Created a new partition 1 of type 'Linux' and of size 399 MiB. 19 20 Command (m for help): The partition table has been altered. 21 Calling ioctl() to re-read partition table. 22 Syncing disks. 23 24 i586con ~ # Event install complete 103.280/600: 00 Syncing disks. 01 02 i586con ~ # printf 'fat\n\nyes\n' | hdinstall /dev/sda1 /dev/sda 03 This is the device to be used: 04 Device /dev/sda1 is a 399.0 MiB partition 1 05 Disk Vendor/Type: ATA 06 Disk Model: QEMU HARDDISK 07 Disk Size: 0.391 GiB 08 Current filesystem (if any) cannot be used. 09 Choose the filesystem to format to (e[xt4]/[v]fat or quit): Filesystem chosen: v 10 fat 11 The filesystem needs a label. 12 Label [I586CONBT]: Label chosen: I586CONBT 13 The given disk partition will be ERASED, check that it is correct. 14 Type yes to continue: Continuing in 3 seconds 15 mkfs.fat 4.2 (2021-01-31) 16 495 blocks 17 Save complete - wrote rootfs.img and save.tgz 18 Installing for i386-pc platform. 19 grub-install: warning: cannot open directory `//share/locale': No such file or d 20 irectory. 21 Installation finished. No error reported. 22 Wrote grub.cfg 23 Installation complete, to new beginnings :) 24 Shutdown 10.204/80.0: 00 mkfs.fat 4.2 (2021-01-31) 01 495 blocks 02 Save complete - wrote rootfs.img and save.tgz 03 Installing for i386-pc platform. 04 grub-install: warning: cannot open directory `//share/locale': No such file or d 05 irectory. 06 Installation finished. No error reported. 07 Wrote grub.cfg 08 Installation complete, to new beginnings :) 09 poweroff 10 i586con ~ # poweroff 11 i586con ~ # Stopping network: OK 12 Stopping klogd: OK 13 Stopping syslogd: stopped /sbin/syslogd (pid 298) 14 OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: /dev/sr0 busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 05-install-cd-fat === total time | wait time | event 4.8s | 4.8s | bootloader 71.8s | 66.7s | login prompt 77.4s | 5.2s | logged in 91.6s | 11.0s | fdisk complete 198.9s | 103.3s | install complete 209.9s | | Shutdown === HTML: 05-install-cd-fat.html Event GRUB 9.951/20: 00 01 GNU GRUB version 2.12 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 4s. 23 24 Event login prompt 76.444/300: 00 [ 17.064119] random: crng init done 01 [ 20.502480] zram: Added device: zram0 02 [ 20.569463] zram0: detected capacity change from 0 to 32768 03 Setting up swapspace version 1, size = 16773120 bytes 04 [ 20.803456] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 05 6380k SS 06 Media found and mounted. 07 Unpacking save.tgz... 08 Copying read-only image to RAM... 09 Setting up overlay... 10 [ 29.617304] loop0: detected capacity change from 0 to 60664 11 Switching to main /sbin/init 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 5.165/40: 00 [ 20.502480] zram: Added device: zram0 01 [ 20.569463] zram0: detected capacity change from 0 to 32768 02 Setting up swapspace version 1, size = 16773120 bytes 03 [ 20.803456] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 04 6380k SS 05 Media found and mounted. 06 Unpacking save.tgz... 07 Copying read-only image to RAM... 08 Setting up overlay... 09 [ 29.617304] loop0: detected capacity change from 0 to 60664 10 Switching to main /sbin/init 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 15.914/80.0: 00 Populating /dev using udev: done 01 Starting network: OK 02 Starting gpm (eventually, maybe) 03 04 Login as root or user (no password). 05 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 06 07 Welcome! (/dev/tty1) 08 09 i586con login: root 10 i586con ~ # poweroff 11 i586con ~ # Stopping network: OK 12 Stopping klogd: OK 13 Stopping syslogd: stopped /sbin/syslogd (pid 306) 14 OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: none busy - remounted read-only 19 umount: devtmpfs busy - remounted read-only 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 06-hdboot-fat === total time | wait time | event 10.0s | 10.0s | GRUB 86.5s | 76.4s | login prompt 92.1s | 5.2s | logged in 108.7s | | Shutdown === HTML: 06-hdboot-fat.html Event GRUB 8.950/20: 00 01 GNU GRUB version 2.12 02 03 ┌────────────────────────────────────────────────────────────────────────────┐ 04 │*i586con/RAM │ 05 │ i586con/CDlike │ 06 │ i586con/BIOS2RAM │ 07 │ │ 08 │ │ 09 │ │ 10 │ │ 11 │ │ 12 │ │ 13 │ │ 14 │ │ 15 │ │ 16 │ │ 17 └────────────────────────────────────────────────────────────────────────────┘ 18 19 Use the ↑ and ↓ keys to select which entry is highlighted. 20 Press enter to boot the selected OS, `e' to edit the commands 21 before booting or `c' for a command-line. 22 The highlighted entry will be executed automatically in 5s. 23 24 Event login prompt 89.277/300: 00 [ 6.932078] Freeing initrd memory: 4096K 01 [ 7.363035] Freeing initrd memory: 1808K 02 [ 9.280772] Freeing unused kernel image (initmem) memory: 320K 03 [ 9.288031] Write protecting kernel text and read-only data: 2924k 04 [ 9.292904] Run /init as init process 05 [ 10.608554] loop0: detected capacity change from 0 to 60664 06 [ 14.960919] zram: Added device: zram0 07 [ 16.175709] zram0: detected capacity change from 0 to 32768 08 Setting up swapspace version 1, size = 16773120 bytes 09 [ 16.452744] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 10 6380k SS 11 [ 17.066524] random: crng init done 12 Starting syslogd: OK 13 Starting klogd: OK 14 Launching net_daemon.sh 15 Populating /dev using udev: done 16 Starting network: OK 17 Starting gpm (eventually, maybe) 18 19 Login as root or user (no password). 20 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 21 22 Welcome! (/dev/tty1) 23 24 i586con login: Event logged in 4.744/40: 00 [ 7.363035] Freeing initrd memory: 1808K 01 [ 9.280772] Freeing unused kernel image (initmem) memory: 320K 02 [ 9.288031] Write protecting kernel text and read-only data: 2924k 03 [ 9.292904] Run /init as init process 04 [ 10.608554] loop0: detected capacity change from 0 to 60664 05 [ 14.960919] zram: Added device: zram0 06 [ 16.175709] zram0: detected capacity change from 0 to 32768 07 Setting up swapspace version 1, size = 16773120 bytes 08 [ 16.452744] Adding 16380k swap on /dev/zram0. Priority:10 extents:1 across:1 09 6380k SS 10 [ 17.066524] random: crng init done 11 Starting syslogd: OK 12 Starting klogd: OK 13 Launching net_daemon.sh 14 Populating /dev using udev: done 15 Starting network: OK 16 Starting gpm (eventually, maybe) 17 18 Login as root or user (no password). 19 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 20 21 Welcome! (/dev/tty1) 22 23 i586con login: root 24 i586con ~ # Shutdown 17.142/80.0: 00 Populating /dev using udev: done 01 Starting network: OK 02 Starting gpm (eventually, maybe) 03 04 Login as root or user (no password). 05 System (& kernel) logs are in VT7 (Alt-F7) or /var/log/messages 06 07 Welcome! (/dev/tty1) 08 09 i586con login: root 10 i586con ~ # poweroff 11 i586con ~ # Stopping network: OK 12 Stopping klogd: OK 13 Stopping syslogd: stopped /sbin/syslogd (pid 55) 14 OK 15 umount: tmpfs busy - remounted read-only 16 umount: overlay busy - remounted read-only 17 umount: overlay busy - remounted read-only 18 umount: devtmpfs busy - remounted read-only 19 umount: can't unmount /: Invalid argument 20 The system is going down NOW! 21 Sent SIGTERM to all processes 22 Sent SIGKILL to all processes 23 Requesting system poweroff 24 === SUMMARY for 07-hdboot-fat-b2r === total time | wait time | event 8.9s | 8.9s | GRUB 98.5s | 89.3s | login prompt 103.6s | 4.7s | logged in 121.5s | | Shutdown === HTML: 07-hdboot-fat-b2r.html